Author Topic: Carb top rubbers on 350 gtr  (Read 117 times)

0 Members and 1 Guest are viewing this topic.

Offline disc valve

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 10
Carb top rubbers on 350 gtr
« on: August 26, 2020, 03:56:55 PM »
Hi all
How do you fit the oil pump cable through the carb top rubber without splitting it.also what type of air filter should i use on tha 350 gtr or is the wire gauze sufficient.cheers

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 516
  • 1968 BS 350 GTR
Re: Carb top rubbers on 350 gtr
« Reply #1 on: August 26, 2020, 05:08:41 PM »
I have had luck heating the rubber top with a heat gun and using a lubricant
to slid the oil line thru the top. Be careful not to over heat the rubber.

Good luck.

Randy

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1207
Re: Carb top rubbers on 350 gtr
« Reply #2 on: August 26, 2020, 05:21:58 PM »
For the air filter, I use a 1/4" or thicker sheet of air filter foam cut a little larger than the screen (guaze) bracket, stuck around the edges to it with contact cement, oiled, then jammed into the filter housing. I wouldn't just use the screen, it won't stop fine particles. It originally was flocked with some filter-like material which deteriorated and fell off.
« Last Edit: August 26, 2020, 05:23:55 PM by OldSwartout »
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS175HS
BS350 GTR

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 905
Re: Carb top rubbers on 350 gtr
« Reply #3 on: August 27, 2020, 07:03:45 AM »
     Another way to insert the oil pump cable (but more labor intensive) is to dismantle the cable splitter and feed the cable in from the bottom of the carb rubber. This avoids having to force the cable adjuster through the rubber. Splitter top will pop off with a bit of gentle levering.
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline OHRider

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 17
Re: Carb top rubbers on 350 gtr
« Reply #4 on: August 27, 2020, 07:51:26 AM »
I have had luck heating the rubber top with a heat gun and using a lubricant
to slid the oil line thru the top. Be careful not to over heat the rubber.

Good luck.

Randy

I would use a hairdryer on high. Heat gun can get way too hot.
Thanks

Al
Warren OH

Offline disc valve

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 10
Re: Carb top rubbers on 350 gtr
« Reply #5 on: August 27, 2020, 11:38:09 AM »
  Thanks for your advise. Dismantling the cable splitter popped into my head during the night and ive got some sheet filter foam that i can cut to size.cheers

 


Gallery


Views:8
Comments (0)
By: JGC NH

Views:11
Comments (0)
By: rwgibbon

Views:9
Comments (0)
By: rwgibbon

Views:15
Comments (0)
By: Perry L Anderson

Classifieds

1968 350 GTR for sale in SE Pennsylvania

Price: $3000.00
Date: 08/26/2020 03:42 pm
Time Left:
I need a 350 GTO Oil tank
Date: 08/04/2020 11:25 pm
Time Left:
Chibi parts wanted Left side case cover
Date: 07/03/2020 09:04 am
Time Left:
1965 90 Sport
Price: $0.00
Date: 06/02/2020 08:52 am
Time Left:

Recent Downloads added

1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM
2018 Article in Motorcycle Classics
Rating: (None)
Filesize: 3877.88KB
Date: June 29, 2020, 05:26:00 PM
350 GTR pdf version

Rating: (None)
Filesize: 7366.26KB
Date: March 14, 2020, 09:41:23 AM
Parts Manual for BS175-200 Lights
Rating: (None)
Filesize: 971.88KB
Date: March 06, 2020, 04:30:46 PM

Powered by EzPortal