Author Topic: Crankshaft seals  (Read 843 times)

0 Members and 1 Guest are viewing this topic.

Offline erniegroen

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 17
Crankshaft seals
« on: May 11, 2020, 02:12:29 PM »
I bought a 350 gtr basket case and now started the restoration. The first problem I discovered with the crankshaft. The previous owner has renewed the outer bearings and probably destroyed the seals 09090-117 during disassembly. I think the seal is important for the bigend lubrication! I want to use the oil pump later and I am thinking about making new seals. Is there anyone who still has old (or new) seals left and wants to sell them? Or can someone help me with an image or drawing of this seal? I am also looking for a good used or new piston.
Thanks in advance, Ernie

Offline AlanJohn

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 209
Re: Crankshaft seals
« Reply #1 on: May 11, 2020, 03:12:50 PM »
Your on the right site l take it you've asked the site owner Richard Clarke he's the man you need to talk to

Offline BS Mechanic

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 278
Re: Crankshaft seals
« Reply #2 on: May 12, 2020, 07:56:46 AM »
It is my belief that the seals were added as a design requirement by the marketing department so they could advertise the "pressure lubrication", NOT by the engineering department.  The seals provide no benefit to the bearings, and instead pose a very real risk. 

Although most will stay in place, a few do become loose and cause catastrophic damage.  They are definitely NOT worth the risk, as Bridgestone determined during production.

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1239
Re: Crankshaft seals
« Reply #3 on: May 12, 2020, 08:27:52 AM »
They took them off briefly in production, but then put them back. They are needed, but probably only if you run high RPM for extended time, IMHO. The rods do not have slots to allow fuel mix to get to the bottom end bearings like most high performance two-strokes. To get adequate fuel mix to the bearings through the drilling in the crank pin requires a collection annulus.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS175HS
BS350 GTR

Offline bert Lilley

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 26
Re: Crankshaft seals
« Reply #4 on: August 27, 2020, 02:05:26 PM »
 I roadrace my 350, never used them never need them, felt they where a hazard in a high revving engine just something to go wrong, but i don't run oil pump same thing just something else to go wrong.   Bert VRRA 98

Offline Ritz4022

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 1
Re: Crankshaft seals
« Reply #5 on: November 26, 2020, 10:49:21 PM »
Bert: I saw a post on this site that you know something about a family member of mine. John Cressy is my name. I guess you posted it in December 2017. I very seldom go on this blog. So when I saw that, I had to ask. You can reach me on Bridgestone facebook page.

 


Gallery


Views:90
Comments (0)
By: Usedknobby

Views:97
Comments (0)
By: Usedknobby

Views:178
Comments (0)
By: Perry L Anderson

Views:154
Comments (0)
By: Perry L Anderson

Classifieds

GTO
Date: 06/09/2021 03:41 pm
Time Left:
GTO
Date: 05/25/2021 03:29 am
Time Left:
GTO
Date: 04/29/2021 04:31 pm
Time Left:
Looking for a TMX100 top end
Date: 03/25/2021 11:23 pm
Time Left:

Recent Downloads added

BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM
2018 Article in Motorcycle Classics
Rating: (None)
Filesize: 3877.88KB
Date: June 29, 2020, 05:26:00 PM
350 GTR pdf version

Rating: *****
Filesize: 7366.26KB
Date: March 14, 2020, 09:41:23 AM

Powered by EzPortal