Author Topic: BS 350 GTO/ 175 HS Heat Shield Fasteners  (Read 190 times)

0 Members and 1 Guest are viewing this topic.

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 498
  • 1968 BS 350 GTR
BS 350 GTO/ 175 HS Heat Shield Fasteners
« on: January 03, 2020, 09:11:32 PM »
Is there anyone out there that could post pictures of the following parts?

0341 - 0608 Cross Reed Oval Head Screw
09531 - 102 Cross Reed Pan Head Screw
6323 - 8010 Screw Cover Packing A
6324 - 0810 Screw Cover Packing B

These are shown in the parts manual for use on the heat shields.
I would like to actually see what they look like.

Thank you for your assistance.

Happy 2020.

Randy

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 893
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #1 on: January 04, 2020, 10:14:43 AM »
          Happy and successful 2020 to all.
   Hi Randy,
             I don't have a photo readily to hand but can give details of the above items as found on the GTO :-

  0341     Front shield screw - Countersunk screw with slightly domed head, 6mm dia,  6mm of thread.

  09531   Rear shield screw -  Standard cross head screw, 6mm dia as used on engine covers etc, 8mm of thread

  6324     Outer cover packing - these are effectively fibre washers stamped from 1mm thick, black, heat resistant
               gasket material, 10mm od and sit inside white plastic screw cover under the screw head. 
  6323     Inner cover packing, as above but with 12mm od to match  base of white screw cover.

                  Hope this helps, I often wondered what the shield attachment was all about before getting a GTO !     Simple when you see it. Another example of BS attention to detail.
               Still don't know why BS didn't use white plastic screw covers on front shield - maybe wouldn't tolerate higher temps.                                                                                                 Brian.
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 498
  • 1968 BS 350 GTR
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #2 on: January 04, 2020, 10:37:30 AM »
Thank you Brian.

I have never seen an original high piper with
the original parts. That is why I would like to see
what the original parts look like.

Thanks again.

Randy

Online Mike Anderson

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 847
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #3 on: January 04, 2020, 11:08:21 AM »
Randy,
Send me a message at  fleagle14@embarqmail.com and I will send you a couple pictures of an original unrestored gold GTO I had a few years back.
Later Mike

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2178
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #4 on: January 04, 2020, 12:10:02 PM »
Here ya go Randy.....  left to right in the same order as your list from top to bottom.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 498
  • 1968 BS 350 GTR
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #5 on: January 04, 2020, 05:39:38 PM »
Thank you very much.

I did not know what the difference was.

Randy

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 498
  • 1968 BS 350 GTR
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #6 on: January 05, 2020, 10:29:59 AM »
After searching the parts book I believe you are supposed to use 0311 – 0608
for both. Check Parts Price List page 34, 09531 – 102. It subs to 0311 - 0608

I can’t find a 0341 – 0608 in the Parts Price List, only 0311 – 0608.

This is not the first time I have run into something like this.

Randy

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2178
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #7 on: January 05, 2020, 11:20:59 AM »
Not sure why 0341 – 0608 isn't in the parts price list, but here's some pics of 2 original screws that came off my GTO along with the mounting holes for both the front and rear heat shields.

The front (left in pic) clearly takes the oval headed screw, while the back (right in pic) uses the pan head screw. No way they both use the same screw.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 498
  • 1968 BS 350 GTR
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #8 on: January 05, 2020, 12:48:53 PM »
Mike,

They both are 6 MM correct?

Randy

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2178
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #9 on: January 05, 2020, 01:19:34 PM »
Mike,

They both are 6 MM correct?

Randy

Yes, they're both 6mm.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline srpackrat49

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 153
Re: BS 350 GTO/ 175 HS Heat Shield Fasteners
« Reply #10 on: January 05, 2020, 03:06:37 PM »
My 1970 GTO 350 has those white plastic things for the heat schilds....






 


Gallery


Views:3
Comments (0)
By: rwgibbon

Views:4
Comments (0)
By: rwgibbon

Views:4
Comments (0)
By: rwgibbon

Views:17
Comments (0)
By: DPK

Classifieds

Taka Rear Fender
Date: 04/03/2020 07:24 am
Time Left:
Wanted: 100TMX Oil Pump Inlet Spring and Check Ball
Date: 03/26/2020 11:40 pm
Time Left:
late 60's 175 huricane
Price: $1200.00
Date: 03/09/2020 08:57 am
Time Left:
NOS 175/200 Petcock

Price: $0.00
Date: 01/18/2020 01:34 pm
Time Left:

Recent Downloads added

350 GTR pdf version

Rating: (None)
Filesize: 7366.26KB
Date: March 14, 2020, 09:41:23 AM
Parts Manual for BS175-200 Lights
Rating: (None)
Filesize: 971.88KB
Date: March 06, 2020, 04:30:46 PM
!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM

Powered by EzPortal