Author Topic: Greetings From Iowa  (Read 75 times)

0 Members and 1 Guest are viewing this topic.

Offline Moto Pascale

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 1
Greetings From Iowa
« on: September 28, 2019, 04:49:42 PM »
Hello All,
I run a small motorcycle fabrication shop in my spare time and I've recently volunteered to do some work on a BS90 Trail for a "friend of a friend" type situation. The owner managed to snap the kick start shaft clean off the side of the engine and there are a few miscellaneous parts that need to be replaced.

Since the kick start shaft needs to replaced I'll be splitting the engine case in order to do so. I have a kick start shaft in my possession from a TMX 100 and was wondering if anyone could confirm if this kick start shaft would work in the BS90? From my understanding, there are a lot of common parts between the two but some confirmation on this one would be greatly appreciated.

I'll do my best to document the process of bringing this old gal back to life and should have a separate post started in the next few days. For now, here is a picture of the bike as she currently stands.


Thanks for the read!

Online OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1141
Re: Greetings From Iowa
« Reply #1 on: September 29, 2019, 08:31:23 AM »
The parts and service manuals are available to download under the Downloads section of this site.  There are two different kickstart shafts, one for the non-oil injection engines and a different one for those with oil injection. The TMX was oil injection, and it appears your bike is also (I see an oil tank in the photo.)

Richard Clark, owner of this forum, has  good selection of parts, but some things are out of stock as  might be expected after 50 years.
« Last Edit: September 29, 2019, 08:33:59 AM by OldSwartout »
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

 


Gallery


Views:14
Comments (0)
By: rwgibbon

Views:22
Comments (2)
By: rwgibbon

Views:7
Comments (0)
By: rwgibbon

Views:24
Comments (1)
By: rwgibbon

Classifieds

350 Petcock Chrome Nozzle

Date: 09/13/2019 09:20 am
Time Left:
1967 Bridgestone 350 GTR
Price: $3000.00
Date: 08/10/2019 02:31 pm
Time Left:
1968 350 GTR top end

Price: $400.00
Date: 07/19/2019 04:22 pm
Time Left:
Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:52 pm
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal