Author Topic: Alternate BS 350 Fuel Cock  (Read 246 times)

0 Members and 1 Guest are viewing this topic.

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 481
  • 1968 BS 350 GTR
Alternate BS 350 Fuel Cock
« on: August 25, 2019, 06:38:29 PM »
Has anyone  come up with a good alternative to the original 22 MM Bridgestone 350 fuel cock?

I'm restoring a BS 350 GTR as a rider and do not want to spend the money for a NOS Fuel Cock.

Restoring the original fuel cock is not an option.

I did a search on this site and did not find any. Scott's Bridgestone recommends a Kawasaki Z1 900.
I have not found a good quality alternative yet.

Recommendations are appreciated.

Thank you.

Randy

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 86
Re: Alternate BS 350 Fuel Cock
« Reply #1 on: August 26, 2019, 02:12:50 AM »
Hi Randy,

Richard has internal kits to restore taps.

If it's more than the internals corroded, what is wrong / missing from your existing one ?

ray

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 118
Re: Alternate BS 350 Fuel Cock
« Reply #2 on: August 26, 2019, 03:12:04 AM »
The stock petcock is easily rebuilt with the kit from Richard Clark. If the body is too far gone the petcock for the Z1 Kawasaki is a good replacement.

Offline Mike Anderson

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 844
Re: Alternate BS 350 Fuel Cock
« Reply #3 on: August 26, 2019, 01:17:33 PM »
Hi Randy,

Why not get a kit from Richard, he probably has a good rebuildable petcock for next to nothing. You could clean it up and install the new kit. A lot easier than looking for a different replacement and cheaper than a new one. Just my thoughts.
Later Mike

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2161
Re: Alternate BS 350 Fuel Cock
« Reply #4 on: September 03, 2019, 03:29:52 PM »
Randy, this one might be your answer...... but you'll have to open up your wallet! As a plus, you wouldn't have to worry about gas flow!  :o

http://www.pingelonline.com/motorcycle-fuel-valves/dual-outlet-3311-d-ch.asp

This one is about $10 cheaper, if you don't mind the brass(?) nozzles....

http://www.pingelonline.com/motorcycle-fuel-valves/dual-outlet-3311-d-ah.asp

Or save even more on eBay.....

https://www.ebay.com/itm/Pingel-3311-D-CH-Power-Flo-Gas-Valve-Dual-Outlet-With-22mm-Nut-Harley-Davidson/173791268538?epid=171247247&hash=item2876c44eba:g:uSMAAOxy4dNSqOh5
« Last Edit: September 03, 2019, 03:58:21 PM by moonpup »
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 481
  • 1968 BS 350 GTR
Re: Alternate BS 350 Fuel Cock
« Reply #5 on: September 04, 2019, 10:12:42 AM »
Thank you Mike.

Randy

Offline Bridgestone Man

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 149
Re: Alternate BS 350 Fuel Cock
« Reply #6 on: September 04, 2019, 05:27:16 PM »
I am with Mike Anderson, I think its best to use a correct original fuel tap and one of Richard's rebuild kits, hey he may have a petcock too.  Sam Keys.


Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 873
Re: Alternate BS 350 Fuel Cock
« Reply #7 on: September 04, 2019, 05:33:29 PM »
          The 5/16 outlets on the Pingel valves may be a problem, could be difficult to stretch the necessary, relatively small diameter fuel tube over the spigots.

Randy, I do have a new, non BS fuel tap that I will probably never use. Will dig it out of my spares stash and pm you with photo, if it can be attached. Came off the GTO, sure we can sort out a trade.                             Brian.
« Last Edit: September 04, 2019, 06:33:36 PM by BRT-GTR »
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 873
Re: Alternate BS 350 Fuel Cock
« Reply #8 on: September 06, 2019, 05:10:15 AM »
          Finally found it. Tap does fit, can be configured to left or right lever operation and I will fit a second filter to the main supply. Let me know if you are interested or anyone else come to that.                                           Brian

 
« Last Edit: September 06, 2019, 05:21:08 AM by BRT-GTR »
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

 


Gallery


Views:21
Comments (2)
By: Detecable

Views:17
Comments (0)
By: rwgibbon

Views:15
Comments (0)
By: rwgibbon

Views:18
Comments (0)
By: rwgibbon

Classifieds

Gtr
Date: 11/23/2019 10:27 am
Time Left:
GTR handlebars
Date: 11/17/2019 01:05 pm
Time Left:
GTR
Date: 10/27/2019 03:34 am
Time Left:
'71 BS350, Illinois

Price: $0.00
Date: 10/24/2019 05:24 pm
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal