Author Topic: Electrical bullet connectors stuck solid ?, try this simple tip  (Read 269 times)

0 Members and 1 Guest are viewing this topic.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 834
Electrical bullet connectors stuck solid ?, try this simple tip
« on: November 19, 2018, 11:48:07 AM »
          I have struggled to disconnect the bullet connectors when stripping down and have ended up pulling the connectors off the wires before now.
          Well, here's an easy way to get them apart. Simply warm the connectors up, gently with a hairdryer, this softens the hardened insulation, breaks any seal and they seem to pop apart easier than when they were new. Give it a try, works every time.        Used it today to unhook the headlight connectors, wouldn't budge before I warmed them up.
             Brian.
« Last Edit: November 20, 2018, 04:55:45 AM by BRT-GTR »
Unspoiled by progress.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2140
Re: Electrical bullet connectors stuck solid ?, try this simple tip
« Reply #1 on: November 19, 2018, 11:58:35 AM »
That's good to know Brian, cuz yelling at them didn't seem to work!   ;D
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline Steve Swan

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 78
Re: Electrical bullet connectors stuck solid ?, try this simple tip
« Reply #2 on: November 20, 2018, 12:50:02 AM »
          I have struggled to disconnect the bullet connectors when stripping down and have ended up pulling the connectors off the wires before now.
          Well, here's an easy way to get them apart. Simply warm the connectors up, gently with a hairdryer, this softens the hardened insulation, breaks any seal and they seem to pop apart easier than when they were new. Give it a try, works every time.        Used it today to unhook the headlight connectors, wouldn't move before I warmed them up.
             Brian.

ya'll probably know this but a crusty wiring harness worth saving can be cleaned in the ultrasonic; connectors that are yellowed and even brown will return clear and nearly if not like new.

Offline steve

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 134
Re: Electrical bullet connectors stuck solid ?, try this simple tip
« Reply #3 on: November 20, 2018, 08:40:11 AM »
Strangely enough Brian, I've only recently discovered this myself after years of struggling and occasionally pulling bullets from the wiring. I use one of these DeWalt heat guns set at 70-80 deg.C...works a treat.

Steve

 


Gallery


Views:7
Comments (0)
By: comer

Views:8
Comments (0)
By: comer

Views:23
Comments (0)
By: rwgibbon

Views:34
Comments (1)
By: Mopar5426

Classifieds

1967 Bridgestone 350 GTR
Price: $3000.00
Date: 08/10/2019 02:31 pm
Time Left:
1968 350 GTR top end

Price: $400.00
Date: 07/19/2019 04:22 pm
Time Left:
Looking For...

Date: 07/10/2019 12:24 pm
Time Left:
350 specialty tool shadow/peg board

Date: 07/06/2019 12:40 pm
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal