Electrical Parts Source

[Kenneth Pagel]

Need a good source for the small rubber boots that cover the ends of the ignition wires to the coils (not the hi-tension leads). Also, need new rubber covers for the instuments bulb sockets. Thanks in advance!

[hardy]

Try this link, member “sye” a few years ago found a replacement option.

http://bridgestonemotorcycleparts.com/index.php?topic=4178.0

Hardy

[moonpup]

Need a good source for the small rubber boots that cover the ends of the ignition wires to the coils (not the hi-tension leads).....snip.....   

Good luck, I've been looking for those rubber boots since 2012 and have yet to find an acceptable replacement.  (I'm super pickythough, so that can be a problem....)

http://bridgestonemotorcycleparts.com/index.php?topic=2911.msg14079#msg14079

[Kenneth Pagel]

Bulb holders are NLA from the India supplier listed. I'll check fleabay to see if there is a similar listing.

[Kenneth Pagel]

Found these thru "Webike" in Japan. They are for a Z-1, but appear to be identical in size/shape (I have a Z-1 for comparison). Wire colors are differeent from a GTR, of course.

https://japan.webike.net/products/22626961.html

[Kenneth Pagel]

Found on fleabay, and may work?:

https://www.ebay.com/itm/T10-Rubber-Socket-Holder-Instrument-Gauge-Light-1-2-Diameter-w-Bulb-M70B/261628965200?hash=item3cea4d3150