Author Topic: Front Brake Stop Switch Perch Threads  (Read 819 times)

0 Members and 1 Guest are viewing this topic.

Offline davis

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 144
  • Desire for a better world.
Front Brake Stop Switch Perch Threads
« on: December 07, 2017, 08:21:26 PM »
I had a front brake lever perch on my 350 GTR that had the threaded hole for the stop switch, so I quickly purchased the switch and Moonpup's harness only to find the switch's fine thread did not fit my perch's course thread. The thread appears to be original on the perch. Also noted Moonpup's perch on ebay has no hole, only a boss for one. Can anyone shed some light on these variations?

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2205
Re: Front Brake Stop Switch Perch Threads
« Reply #1 on: December 07, 2017, 09:12:16 PM »
Bob,

Here's a link to an earlier thread I started on the differences I observed on the front brake perches.   http://bridgestonemotorcycleparts.com/index.php?topic=4316.0

The perches I currently have on eBay are the replacement perches for the early GTR's that didn't come with front brake switches. They're almost identical to the perches for the 70 & 71 GTO's & GTR's with switches, but haven't been drilled out and tapped for the switch.

Below is a picture of one currently on eBay that is tapped out and you can clearly see the fine threads on this NOS example.

Not sure why yours would have coarser threading?

https://www.ebay.com/itm/NOS-BRIDGESTONE-200-and-some-350-models-Right-Lever-Holder/112337187846?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline davis

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 144
  • Desire for a better world.
Re: Front Brake Stop Switch Perch Threads
« Reply #2 on: December 08, 2017, 04:59:37 AM »
Thanks Mike. Looks like I either have a rare version 4 or someone, for unknown reasons, expertly machined a version 3 (blank boss), because the the boss was been spot faced and tapped with a course thread. This came off a '67-'68 bike. Anyways, my bike's a true replica, so a version 1 (no boss) is going back on. I'll save your harness for a planned, highly modified, rider in the future that will use the front brake light option.

Merry Christmas all!

 


Gallery


Views:4
Comments (0)
By: Chibi62

Views:6
Comments (0)
By: Chibi62

Views:9
Comments (0)
By: Chibi62

Views:5
Comments (0)
By: Chibi62

Classifieds

1970 Bridgestone Mach II SS Motorcycle 200 CC

Price: $3200.00
Date: 01/17/2021 01:37 pm
Time Left:
1970 Bridgestone Mach II SS Motorcycle 200 CC
Price: $3200.00
Date: 01/17/2021 01:36 pm
Time Left:
GTO
Date: 12/29/2020 01:08 pm
Time Left:
GTO
Date: 12/26/2020 02:46 pm
Time Left:

Recent Downloads added

1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM
2018 Article in Motorcycle Classics
Rating: (None)
Filesize: 3877.88KB
Date: June 29, 2020, 05:26:00 PM
350 GTR pdf version

Rating: *****
Filesize: 7366.26KB
Date: March 14, 2020, 09:41:23 AM
Parts Manual for BS175-200 Lights
Rating: (None)
Filesize: 971.88KB
Date: March 06, 2020, 04:30:46 PM

Powered by EzPortal