Author Topic: 90 cylinder swap on a 60?  (Read 1788 times)

0 Members and 1 Guest are viewing this topic.

wardie

  • Guest
  • Trade Count: (0)
90 cylinder swap on a 60?
« on: May 01, 2016, 07:17:27 PM »
If I purchased cylinder, base gasket, piston and rings plus head is it an easy swap to fit onto a 60 motor?

Looking to upgrade thought if I could swap a 90 top end that would the  easiest. Anyone can share factual info on this swap?

Offline mqtsteve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 270
  • (2) BS90 Sport , BS90 Trail, BS90 Mountain
Re: 90 cylinder swap on a 60?
« Reply #1 on: May 02, 2016, 07:17:00 AM »
Hey wardie,
I'm not sure, but I think the 60 and 90 have different cylinder stud patterns.  The 90 cylinder is bigger and has different studs.  Cylinder stud (p/n 2121-5000) and head stud (p/n 1126-5000).  I don't think it would be an easy swap?  Some other members may have a concrete answer?  Good luck! Steve
Steve S.
4/1966 BS90 Sport(o.i.), 5/1966 BS90 Sport(o.i.),
1965 BS90 Trail, 1965 BS90 Mountain

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1389
Re: 90 cylinder swap on a 60?
« Reply #2 on: May 02, 2016, 11:21:40 AM »
No experience here, but just  makes me wonder how the big end and crank bearings would stand up to the additional displacement (force)...If its even possible. ???
...bert

Offline disc_valve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 406
Re: 90 cylinder swap on a 60?
« Reply #3 on: May 03, 2016, 09:04:43 AM »
Sorry, Wardie, that swap is not on. The 60 Sport is a bored-out 50Sport, and the 50 Sport engine castings are all around 20% smaller in dimension that the 90 motor. The 90 cylinder spigot is too big to fit the  hole in the 60 crankcase, and the 90 Sport gudgeon pin is too large to fir in the 60 con rod.

Graham

 


Gallery


Views:9
Comments (0)
By: Gonzo

Views:9
Comments (0)
By: Gonzo

Views:9
Comments (0)
By: Gonzo

Views:8
Comments (0)
By: Gonzo

Classifieds

NOS 175/200 Petcock

Price: $0.00
Date: 01/18/2020 01:34 pm
Time Left:
350 GTR/GTO Front Brake Switch Wiring Sub-Harnesses

Price: $0.00
Date: 01/05/2020 11:57 pm
Time Left:
350 GTR/GTO Positive & Negative Wiring Sub-Harnesses

Price: $0.00
Date: 01/05/2020 11:54 pm
Time Left:
Gtr
Date: 11/23/2019 10:27 am
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal