Author Topic: Paint advice  (Read 1263 times)

0 Members and 1 Guest are viewing this topic.

Gizo

  • Guest
  • Trade Count: (0)
Paint advice
« on: February 14, 2015, 11:51:49 PM »
I am painting my 175dt, 
I took the tank side cove and oil tank back to bare metal,  primed, etc.
I have just sprayed colour,
6 coats of colour, 5 coats of clear all acrylic ( I know 2k is better,  but first attempt at painting, and was advised to do acrylic).
Anyway I got the colour nice and even, the clear coat had a bit of orange peel, I sanded the clear coat,  when I noticed pin holes in the clear,  ?    Any ideas what they might be from?  Do I sand them out or keep buffing till they are gone?  I could not see them when I sanded they only showed after buffing. Photo do not show it,  the White spots are just polish
Any advice appreciated

 


Gallery


Views:9
Comments (0)
By: Gonzo

Views:8
Comments (0)
By: Gonzo

Views:8
Comments (0)
By: Gonzo

Views:7
Comments (0)
By: Gonzo

Classifieds

350 GTR/GTO Front Brake Switch Wiring Sub-Harnesses

Price: $0.00
Date: 01/05/2020 11:57 pm
Time Left:
350 GTR/GTO Positive & Negative Wiring Sub-Harnesses

Price: $0.00
Date: 01/05/2020 11:54 pm
Time Left:
Gtr
Date: 11/23/2019 10:27 am
Time Left:
GTR handlebars
Date: 11/17/2019 01:05 pm
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal