Author Topic: exhaust  (Read 2763 times)

0 Members and 1 Guest are viewing this topic.

pallmall

  • Guest
  • Trade Count: (0)
exhaust
« on: August 08, 2009, 10:02:24 AM »
the exhaust on the left side is getting hot and i just wonder why  but on the right side is not that hot

Offline rocketman

  • Global Moderator
  • Trade Count: (2)
  • *******
  • Posts: 470
Re: exhaust
« Reply #1 on: August 08, 2009, 02:14:55 PM »
Have you taken a plug reading? One may be leaner than the other. Compression even between cylinders? Same amount of baffle/packing each -nothing clogged up in one pipe?
« Last Edit: August 08, 2009, 02:20:37 PM by rocketman »

pallmall

  • Guest
  • Trade Count: (0)
Re: exhaust
« Reply #2 on: August 08, 2009, 02:19:51 PM »
no i have i dont no how to do it

Offline rocketman

  • Global Moderator
  • Trade Count: (2)
  • *******
  • Posts: 470
Re: exhaust
« Reply #3 on: August 08, 2009, 02:45:57 PM »
 I'm assuming the bike runs smoothly with no ignition faults? You can probably pull both plugs now and get some indication of difference if any exists by comparing the color. Most accurate plug reading for top end is to start with fresh plugs and run them just a little. Then run the bike out on top end and shut it off without allowing the bike to return to idle.(If you turn your fuel supply off first,make sure you don't run the carbs dry before shutting off). Pull the plugs and look for a medium to light tan. In any case the plugs should look even. Same basic proceedure for low end,but don't run bike past 1/4 throttle,and for a short time(1-2 min.). Plugs will be in a darker,wetter stage,but should still look even. Compression check should be done with both plugs removed. Check one cylinder at a time. Any significant difference will indicate problem. I would opt to check compression and pipes before running the bike out. Access the manuals under the downloads section of this site for carb and throttle cable syncronization and adjustments.  Hopefully,some of the guys with twins will chime in for you. Mark.  (I tried to call you back,but number doesn't answer,you may contact me again with a number if you wish).
« Last Edit: August 08, 2009, 02:50:56 PM by rocketman »

pallmall

  • Guest
  • Trade Count: (0)
Re: exhaust
« Reply #4 on: August 08, 2009, 06:50:38 PM »
i run a Compression check and each cylinder is 120 and i pull up the throttle on the right side and it stay the same but on the left side it did rare up

Offline rocketman

  • Global Moderator
  • Trade Count: (2)
  • *******
  • Posts: 470
Re: exhaust
« Reply #5 on: August 08, 2009, 08:20:08 PM »
 Let me know what you find with the right side carb.

pallmall

  • Guest
  • Trade Count: (0)
Re: exhaust
« Reply #6 on: August 16, 2009, 06:44:08 PM »
hi i took it to the shop to let them fix it thank for all the help you all give me pallmall

 


Gallery


Views:23
Comments (2)
By: Detecable

Views:19
Comments (0)
By: rwgibbon

Views:17
Comments (0)
By: rwgibbon

Views:20
Comments (0)
By: rwgibbon

Classifieds

Gtr
Date: 11/23/2019 10:27 am
Time Left:
GTR handlebars
Date: 11/17/2019 01:05 pm
Time Left:
GTR
Date: 10/27/2019 03:34 am
Time Left:
'71 BS350, Illinois

Price: $0.00
Date: 10/24/2019 05:24 pm
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal