Author Topic: 350 gtr rebuild  (Read 1867 times)

0 Members and 1 Guest are viewing this topic.

scott

  • Guest
  • Trade Count: (0)
350 gtr rebuild
« on: May 28, 2009, 01:07:45 AM »
I took apart my 350 gtr motor. split the halves and cleaned out the inside housings and gears. i did not take any of the trans gears out. just the kick shaft to replace the spring and catch piece.i put the halves back together and i am wonering why the kick shaft wants to turn when i turn the crank shaft. it will ratchet sound on way.the other way it will seem to snap with a revolution of the crank. i am thinking that there shouldnt be any involvment when i turn that piston crank up and down. the kick starter should not be interacting when the engine is turning. i need some help on this. anyboby have any expertice. thanks, ??? scott. 

Offline Bridgestone Man

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 149
Re: 350 gtr rebuild
« Reply #1 on: June 01, 2009, 06:28:09 PM »
Scott  The 350 KS shaft needs to be installed correctly otherwise it will turn all the time and break the spring, if fits in the case
a certain way, just play with it, upon installation and you will "see" it

Sam Keys

 


Gallery


Views:23
Comments (2)
By: Detecable

Views:19
Comments (0)
By: rwgibbon

Views:17
Comments (0)
By: rwgibbon

Views:20
Comments (0)
By: rwgibbon

Classifieds

Gtr
Date: 11/23/2019 10:27 am
Time Left:
GTR handlebars
Date: 11/17/2019 01:05 pm
Time Left:
GTR
Date: 10/27/2019 03:34 am
Time Left:
'71 BS350, Illinois

Price: $0.00
Date: 10/24/2019 05:24 pm
Time Left:

Recent Downloads added

!75 Wiring Diagram - Color Coded
Rating: (None)
Filesize: 136.77KB
Date: February 27, 2019, 01:00:42 PM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: ***
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM

Powered by EzPortal