Bridgestone Motorcycle Parts Discussion Board

Bridgestone Tech Talk => 175 & 200 Talk => Topic started by: scrambler on August 13, 2010, 10:22:20 AM

Title: 175 Radial Fin Head
Post by: scrambler on August 13, 2010, 10:22:20 AM

Out of curiosity does anybody know the maker of these radial finned heads? I have a 175 with a pair of them. No markings on them that I can find. DG?

Thanks

(http://img.photobucket.com/albums/v199/Hahnda/Bridgestone/103_5273.jpg)

Title: Re: 175 Radial Fin Head
Post by: Dave K on August 13, 2010, 02:28:16 PM

A company called "Tabloc" or "Tab Loc", made them. They also made sprockets.

Title: Re: 175 Radial Fin Head
Post by: scrambler on August 13, 2010, 09:36:10 PM

Thanks for the info. I wish there was even a shred of info on the internet about them. Any real performance gain here?

Title: Re: 175 Radial Fin Head
Post by: reed on August 13, 2010, 09:42:23 PM

Scrambler
I have one for a 90 Bridgestone free to any one that wants it!
You call it a Tab loc head.
Thanks.
Reed.

Title: Re: 175 Radial Fin Head
Post by: OldSwartout on August 19, 2010, 11:21:28 PM

The Tabloc heads are about the same compression ratio as the factory racer heads, but have a better combustion chamber design (wider squish band).  They'll give you a little performance gain over stock heads, just run higher octane fuel, or you'll have a seized/holed piston or two.  I'll see if I can dig up the literature I have on them.

Title: Re: 175 Radial Fin Head
Post by: scrambler on August 19, 2010, 11:23:46 PM

Any literature would be great. Thanks

Title: Re: 175 Radial Fin Head
Post by: Richard Clark BS parts on August 21, 2010, 10:27:40 AM

I think those heads would look cool on a custom




Questions? or need Bridgestone parts? call:

Richard Clark
812-944-1643  8am-6pm EST Weekdays

Title: Re: 175 Radial Fin Head
Post by: Dream on June 14, 2015, 08:13:24 AM

Need one Tabloc head marked BS9

Title: Re: 175 Radial Fin Head
Post by: bsracer on July 22, 2015, 09:42:49 AM

DG bought out Tabloc back in the day.

paul