Bridgestone Motorcycle Parts Discussion Board
General Category => General Discussion => Topic started by: mikandrsn on April 09, 2024, 01:11:31 PM
-
Can you tell me how to remove the fork seal nut on a dt175. Mine is and won't unscrew
-
Get a rubber/leather sticky strap used for oil filter removal, perhaps some double sided tape all around. Hopefully this helps Sam
-
Use a good strap wrench and if that doesn't work, you can wrap a piece of rubber around it and secure it with a large hose clamp. Then carefully use a hammer on the head of the clamp to loosen them..