Author Topic: 1970 BS200MIISS-7 Check out Numbers  (Read 1648 times)

0 Members and 1 Guest are viewing this topic.

Offline Perry L Anderson

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
  • Owner of 1970 Mach II SS & 1967 BS175HS
1970 BS200MIISS-7 Check out Numbers
« on: July 16, 2020, 01:11:06 AM »
Houston we have a problem!  These are the numbers on my 1970 MKII SS-7.  Frame # TA-1 35389  11 under number of 175 build. Serial # 23B04490   Engine # TA-2 04456. This would show 762 built in 1 month and 366 built in the next 9 months according to #s collected in Graham's Build documents. My question is the _7 of on sales brochure designate year or 175 frame? Also NADA value guide Mach II SS in 1969 and checkered in 1970. I understand people like their privacy, but can we please get all three numbers when posting so we don't have to guess about how our bikes got the #s. I've seen BS200 serial # with 175 engine and frame numbers and my 1970 mid-build 200 on frame that may be from end of 175 build. Did early 200's ever have TA-2 stamped frames? We may never know unless can get all 3 numbers  posted when questioning a bikes history! After seeing Old bs guy post #s 23I00180  Frame TA-1 31002 engine TA1-00224 is it possible 175 frames were used throughout 200 build up to serial 5000? If engine # on Old bs guy is TA1-00224 is TA2-00224 this makes sense! This would mean 175 build is around 30,850. Graham also stated frame #'s over 37,000  Late model 200's? I,m thinking the slow down in production was because they had to build new frames. Is it possible 35,400 175 frames were built and TA-2 labeled frames started at 23?05000. Anybody know when first TA-2 stamped frame appears in any board discussions or posts?   
« Last Edit: July 16, 2020, 09:44:27 PM by Perry L Anderson »

Offline bsracer

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 344
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #1 on: July 17, 2020, 11:20:53 AM »
I have two 200's. One is just a frame and the other a roller. The numbers on the frame are TA1-30952 and 23I-00131. The roller #'s are TA1-35159 and 23B-04262. Both under the 5000 mark. I have the motor to the roller somewhere but it might be hard to figure which side cover went to that motor. The motors are stripped down and all the side covers in a bin. I'll have a look and see when I have a chance at the range of TA2 side cover #'s (I have a few 200 motors).

paul

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 101
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #2 on: July 17, 2020, 11:46:10 AM »
Hi

You will also find numbers to the right of the drive sprocket. I believe these were stamped on after casting to match the casings after machining.


Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 101
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #3 on: July 17, 2020, 11:47:17 AM »
Pic of engine casings

Offline Perry L Anderson

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
  • Owner of 1970 Mach II SS & 1967 BS175HS
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #4 on: July 17, 2020, 01:08:12 PM »
Thanks for the numbers. I went to postings on 175-200 and found that the 175 frames were used on all 200's  and still can't see any TA-2 stamped frames. On the 175 models why are the serial numbers so much higher than The frame numbers they sit on? Also why were the early 200 engines stamped TA1. In the frame number post he lists 3 frames TA1-30524 ser# 16R32349, TA1-30501 ser#16R32326 and TA1-25615 ser#16R31243! That would be 1083 bikes and 4886 frames in one month. This is also the parts book month changes for parts. How long were the 175 and 200 made at the same time before they before the 175 ended production? I saw 1970 sales brochure offering DT175S ,175HS,MKII/RS-7 and MKII/SS-7 did they have bikes they couldn't sell made in 1968 they offered up as 1970's?
« Last Edit: July 17, 2020, 07:38:58 PM by Perry L Anderson »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #5 on: July 23, 2020, 03:05:00 PM »
My Mach 11 SS is Frame No TA2- 036722. the engine No is TA2- 05714. The plate No is 23 M 05703. If i read this right is my bike January 1971 ?. Does this help with your post ?

Offline Perry L Anderson

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
  • Owner of 1970 Mach II SS & 1967 BS175HS
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #6 on: July 23, 2020, 10:53:47 PM »
Perfect. The reason graham saw a 37000 Was because they changed from TA-1 to TA-2 and kept frame sequence numbers from 175 frames going. I'm Thinking ser #04500 may start TA-2 Frames and the next ? were the BS200 checkered bikes. All chromed tank model were made in japan! All painted tank models made by Rockford Motor Co in USA. tvrich is your bike a checkered? This will make chrome tank bikes BS200 MII/SS and MII/RS bikes, Painted tank bikes BS200 MII/SS-7 and MII/RS-7 made in USA until checkered start have the -7 shown in sale brochures. TVRICH is yours checkered?
« Last Edit: July 23, 2020, 11:13:49 PM by Perry L Anderson »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #7 on: July 24, 2020, 05:19:17 AM »
Its a checkered bike, i was going to post a photo but have yet to figure out how to do it!

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #8 on: July 24, 2020, 06:46:02 AM »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #9 on: July 24, 2020, 06:46:43 AM »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #10 on: July 24, 2020, 06:49:12 AM »
Im not sure if its absolutely original as it has the checkered finish but not the circular 200 badge etc, could it be a crossover bike between the 2 styles ?

Offline Perry L Anderson

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
  • Owner of 1970 Mach II SS & 1967 BS175HS
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #11 on: July 24, 2020, 01:51:54 PM »
I believe the crossover to checkered was at about 04501 on ser # tags and there on TA-2 stamped frames  beginning about TA-2 35401 and 3300 checkered bikes were built to total BS200 built at 7800. From Febuary 1970  the build was way down until Nov1970, this may have been retooling time for checkered model. Very Nice Looking Bike Ya Got There!! Yes that would make yours 1971 BS200 MII/SS Checkered. Only bike i saw stickered 200 was an RS. in Gold paint. I believe they ran out of MII badges which were riveted  so side plate changed to stickers. yours should be 1200 or so of 3300 built
« Last Edit: July 24, 2020, 02:24:45 PM by Perry L Anderson »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #12 on: July 24, 2020, 02:40:27 PM »
Heres a few pics of checkered Mach 11 SS bikes with the 200 badge that i have found on the net over the last couple of years. Dont know the frame numbers etc of any.

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #13 on: July 24, 2020, 02:41:10 PM »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #14 on: July 24, 2020, 02:42:02 PM »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #15 on: July 24, 2020, 02:42:43 PM »

Offline tvrrich

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Re: 1970 BS200MIISS-7 Check out Numbers
« Reply #16 on: July 24, 2020, 02:43:46 PM »

 


Gallery


Views:218
Comments (0)
By: Jon West

Views:1360
Comments (0)
By: rwgibbon

Views:1690
Comments (0)
By: Perry L Anderson

Views:1755
Comments (0)
By: Perry L Anderson

Classifieds

Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:
Gto
Date: 10/19/2023 01:08 pm
Time Left:
Urgent - l/end roller bearing & piston pins needed
Date: 10/08/2023 03:25 am
Time Left:

Recent Downloads added

Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM

Powered by EzPortal