Bridgestone Motorcycle Parts Discussion Board

General Category => Members: Introduce yourself => Topic started by: BryanT on July 12, 2016, 09:26:39 AM

Title: New member from the UK
Post by: BryanT on July 12, 2016, 09:26:39 AM

Hi all - as title - new member here in the UK - in Worcestershire ,  Malvern where Morgan Cars are made !!

Have just agreed to purchase a 1968 BS 90 Trail - a restoration project with just 2000 miles on the clock , just in the UK from the States. I will need some technical help from you all in the future as this is my first Bridgestone, at present I have a 66 BSA Bantam D7 De- Luxe and 2 Cyclemotors - so 2 strokes are my thing!

Looking forward to participating in the forum - regards Bryan

Title: Re: New member from the UK
Post by: Jeff McBrayer on July 12, 2016, 10:41:23 AM

Richard the owner of this site has a Morgan car.

Jeff McBrayer

Title: Re: New member from the UK
Post by: slawsonb on July 12, 2016, 11:19:10 AM

Welcome to the world of BS, BryanT. Many capable and willing helpers on here, so ask away. There are also many members from the UK. I expect one or two will chime in.
...bert

Title: Re: New member from the UK
Post by: BRT-GTR on July 14, 2016, 07:00:25 AM

    Hi Bryan,
                 Welcome to the site and the BS addidtion ? Be careful, before you know it you could have a garage full of Bridgestones ;D.   There are about a dozen UK members active on the site, you'll soon get to know us.    Ask any questions you like, we're all here to help fellow members. Most US machines imported to the UK in the past have been 350's but I have noticed the smaller machines start to appear recently, a trend I hope will continue.

    Good luck with the resto,  Brian in the North West, where TVR cars used to be made!!