engine casing screws

[danielcordon]

hello, does anyone know if its possible to buy full engine casing screw kits for bs 90s?

[OldSwartout]

You can use the parts catalog and make up a list for Richard. He probably has them all or, if not, you can use some longer ones and cut off to length for ones he doesn't have. 

There is a seller on Ebay that sells variety packs of 50 or so with the correct heads.  I bought a pack a few years ago just to have a selection of spares for several of the bikes I have around here. It avoids having to go buy individual screws when one gets messed up or lost. Do a search on "bridgestone screws".

[slawsonb]

Just bought some screws from the seller Karl is referring to (stampman!). The 6MM are correct for BS, but the 5MM have too fine a thread pitch...I tried them on prior agreement I could return if they didn't work. Good experience with this guy...
...bert

[OldSwartout]

That's good to know about the 5mm.

[farmerdl]

There is a guy in the U.K. that sells the correct pitch 5mm screws which if I remember correctly is 5mmx.9.  I believe he sells on ebay and I think (I'll check tomorrow when I'm back in my shop) his website is Mr.Megapack.uk.  Again I will have to check that web address.

DL

[slawsonb]

Would appreciate that info DL...I'm still looking for a 5mm source...
...bert

[farmerdl]

For the m5x0.9 case screws you can email andy@mrmegapack.co.uk.  Again, as I have mentioned in other threads, I would suggest checking with Mr. Clark first as he may have these on hand also and he should always be considered our prime source for parts.