Author Topic: Bridgestone motorcycle parts wanted list  (Read 1871 times)

0 Members and 1 Guest are viewing this topic.

Offline mike1948

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 19
Bridgestone motorcycle parts wanted list
« on: February 26, 2023, 02:20:56 AM »
I've come to a grinding halt on my project.  I need the following list of parts for my 200.
2  x  1381 - 5400    Piston pins

4  x  1382 - 5000    circlips

1  x  1600 - 8200    carburettor

2  x  1333 - 5010    l/end needle roller bearings

1  x  7381 - 8200    rear sprocket 36t

All to suit my Bridgestone e/no TA2 01217 f/no TA1 32039  23L 01209  --  I'm in Brisbane, Australia. Cheers, Mike

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1316
Re: Bridgestone motorcycle parts wanted list
« Reply #1 on: February 28, 2023, 12:06:07 PM »
Check with Richard for the parts; however, if Richard doesn't have them, you may be able to source these Yamaha parts locally.

Years ago, the early BS 1333 - 5010 piston pin bearings would break up when raced, costing a cylinder and piston every time. BS fixed the problem later, but at the time I found the Yamaha DT 100 bearings fit and would withstand racing RPM.   Yamaha bearing 93310-21403 is an exact fit.  The circlips 93450-15023 should fit, but I haven't confirmed that. Also the Yamaha piston pin 131-11633-00 will fit, but IIRC, it is a bit too long and has to be cut off slightly.

Those parts fit all these Yamaha models: CS3 CS5 DT100 HT1 L5 LT2 MX100 RD200 YCS1

I can't help with the carburetor and sprocket though. I assume the carburetors are identical to the 175 carbs except for the jets.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline Motogary

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 25
Re: Bridgestone motorcycle parts wanted list
« Reply #2 on: February 28, 2023, 10:13:16 PM »
I just had a sprocket made for a MachII SS. Great service, reasonable price.

http://www.rebelgears.com/vintagesprockets.html

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1316
Re: Bridgestone motorcycle parts wanted list
« Reply #3 on: March 01, 2023, 09:47:27 AM »
Check the parts catalog; the carburetor differences are just the throttle slide and needle jet, everything else is the same between the 175 and 200.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline mike1948

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 19
Re: Bridgestone motorcycle parts wanted list
« Reply #4 on: March 12, 2023, 03:29:03 AM »
Richard suggested I start this post because his email address would not accept my email orders.  That was a while ago, so I am wondering if he has had a chance to process my order and/or send me an invoice, as he may not be able to acccess my email address.  I have interacted with 6x6 with no problems, but they have limited stock listed.
This seems to be the only way I can contact him.  Hope he's ok.
Cheers, Mike

Offline Richard Clark BS parts

  • Administrator
  • Trade Count: (0)
  • *******
  • Posts: 521
    • Bridgestone Motorcycle Discussion Board
Re: Bridgestone motorcycle parts wanted list
« Reply #5 on: March 13, 2023, 09:34:46 AM »
Mike:  I will  check your email address used on this site, and check my Spam folder for sent messages and report back to you.

Thanks
Richard
Richard  Clark, Owner and provider of this site
BRIDGESTONE MOTORCYCLE PARTS
New Albany IN

BS Shopping Cart- With just a few of my BS parts

https://6x6parts.com/bridgestone_motorcycle_parts/

Thanks
Richard Clark

bsparts@aye.net

Offline mike1948

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 19
Re: Bridgestone motorcycle parts wanted list
« Reply #6 on: March 14, 2023, 03:07:15 AM »
Thanks Richard, the  poor old bike needs some serious help.

Cheers, Mike
mike.c48@mail.com

Offline hankgood

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 36
Re: Bridgestone motorcycle parts wanted list - Rear Sprocket
« Reply #7 on: June 13, 2023, 04:04:56 PM »
I found this rear sprocket for my HS175 - 38 tooth. JT Sprockets had to order the 38 from England (which they gladly did). Looking back on my correspondence they (USA Office) stocked a 36 and 39 tooth back then (2019).

Here's where I first found it: https://www.busters-accessories.co.uk/category/1/search/rear+sprocket+38t+428/in/all/article/509825
Has a diagram with dimensions.

Here is the USA distributor for JT Sprockets http://www.jtsprockets.com/catalogue/sprocket/JTR838/ – Lithia Springs, GA


Offline mike1948

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 19
Re: Bridgestone motorcycle parts wanted list
« Reply #8 on: June 20, 2023, 03:08:57 AM »
Thanks for the info.  The killer is freight from the US to Australia, and as I had ordered a list of parts for my 200 from Richard, it could come over in one parcel.  I have a local bike shop in Brisbane who have made up sprockets for me in the past for my VMX bikes, so if I can't get one from Richard in the near future, I'll take a drive.  Thankfully I did get an almost toothless original with the bike, so they can copy the mounting points.
Cheers, Mike

 


Gallery


Views:521
Comments (0)
By: hod928

Views:514
Comments (0)
By: hod928

Views:513
Comments (0)
By: hod928

Views:678
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
Deleted

Price: $0.00
Date: 06/12/2024 07:57 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal