1971 Mach II, 200 help needed.

[Sno Jet]

I have a few questions concerning this new project of mine and appreciate any help you can send this way. (I am not a mechanic)  For starters,  I do not have a key for it.

1.  How do I buy pass the ignition switch to test for spark?

2.  Is there any way to get a key made for this bike?  Is there a key code any where on the ignition switch?

3.  What spark plugs does this bike take?

Thanks.

[rocketman]

 Glad to have you aboard Snojet! Contact Richard for your key request,they are coded. You can go to the downloads section for free manuals and parts lists,accessible from the toolbar below your name/stats block at the top of the page. Make sure the bike has 2-stroke oil in the resevoir before trying to start,and if it hasn't been run in a while its a good idea to pre-mix oil in the gas first. It won't hurt it to have a little too much oil,better safe than sorry. Plugs are NGK B8H/B8HS. You can use 7's as well,they are a little hotter range though. Mark.

[rocketman]

 Just wanted to say be sure the plugs you end up with if another manufacture are short plugs! Thanks,Mark.