Author Topic: Torque amounts for head bolts (Read 3376 times)

dugmahn · « **on:** April 08, 2011, 02:52:03 PM »

Any one know how much torque I should use on the head bolts? Also should I mix oil with the gas? I was told it is oil injected how can I check to make sure the injector is working? Is there a good repair Manuel out there?

fiction · « **Reply #1 on:** April 08, 2011, 03:51:01 PM »

i know torque setting for the 350 8mm head bolts is 250-300kgcm 217-260lbs depends what you have, you can also download manuals and parts books off this site in manuals section .

OldSwartout · « **Reply #2 on:** April 08, 2011, 06:06:15 PM »

Quote from: fiction on April 08, 2011, 03:51:01 PM

217-260lbs

That's INCH lbs. Not that you are likely to try totighten them to 260 FT lbs....

dugmahn · « **Reply #3 on:** April 08, 2011, 11:45:34 PM »

I have a 200

OldSwartout · « **Reply #4 on:** April 09, 2011, 10:39:23 AM »

The head nut torque for the 175/200 is 140 in lbs.

reed · « **Reply #5 on:** April 09, 2011, 10:58:26 PM »

dugmahn
When you torque your cylinder heads do it in three stages and corner to corner!
Thanks.
Steve.

Bridgestone Motorcycle Parts Discussion Board

News:

Author Topic: Torque amounts for head bolts (Read 3376 times)

dugmahn

Torque amounts for head bolts

fiction

Re: Torque amounts for head bolts

OldSwartout

Re: Torque amounts for head bolts

dugmahn

Re: Torque amounts for head bolts

OldSwartout

Re: Torque amounts for head bolts

reed

Re: Torque amounts for head bolts

Gallery

Classifieds

Recent Downloads added