Author Topic: Right side carb and clutch cover  (Read 14617 times)

0 Members and 1 Guest are viewing this topic.

Offline stainless916

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 5
Re: Right side carb and clutch cover
« Reply #40 on: September 24, 2020, 11:22:26 AM »
I'Ll definately have one if this project goes ahead or maybe I'm too late!

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #41 on: September 24, 2020, 12:44:05 PM »
No, not too late.  Still waiting on the shop doing the machining.  Hadn't thought that this would be the hang up.  Someone had asked for pix of the unfinished castings.  For some reason I have difficulty posting pix on this forum.  I am not exactly skilled in the digital world.  Much better in analog.

Offline stainless916

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 5
Re: Right side carb and clutch cover
« Reply #42 on: September 24, 2020, 01:15:08 PM »
Ok keep me posted.Would you have any problem shipping to UK?

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: Right side carb and clutch cover
« Reply #43 on: September 25, 2020, 02:27:59 PM »
Hey DL. If you could email the pix to me, I can try to post. Will send you a PM....bert

     

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #44 on: September 26, 2020, 12:52:25 PM »
Sent this a.m.

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: Right side carb and clutch cover
« Reply #45 on: September 28, 2020, 11:26:53 AM »
Let's see if we get it done...Whoo hoo! Nice looking part and a great start!...bert

[attachment deleted by admin]

Offline simonhk

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 15
Re: Right side carb and clutch cover
« Reply #46 on: September 28, 2020, 08:31:29 PM »
I will buy 2 when they are ready banana banana banana

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #47 on: April 02, 2021, 04:36:20 PM »
We are getting closer.  We have one machined and bolted up on one of my riders.  I posted pics on the Facebook group and am still trying to understand how to post them in this forum.  Still a few months away from finished product.  Down to only 250 things can still go wrong with this project.  And I thought it would be simple.

DL

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 141
Re: Right side carb and clutch cover
« Reply #48 on: October 14, 2021, 11:32:30 AM »
Just curious about the progress on this thread. Any changes? Thanks....
'65 BS Homer 50, '69 Mk II RS, '67 GTR, '70 GTO, '75 Taka 100, '69 Mk II SS.

Offline davis

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 151
  • Desire for a better world.
Re: Right side carb and clutch cover
« Reply #49 on: October 15, 2021, 09:47:15 PM »
If the cover is a good replica @ $200 ea. I'd take 2 or 3 DL. I am assuming the polishing will be left up to the buyer.

I have a SolidWorks 3D work station and have dipped my toe in this pond with a CNC approach. First off was $500.00, not sure what a 50 lot would be. Kinda neat, because one could choose the material.

- Bob

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #50 on: October 19, 2021, 01:11:21 PM »
I stopped by the shop that is doing the machining on these covers and jumped on them about as hard as I could.  They are busier than a cat covering it's business.  They have a number of large clients that bring them business on a regular basis so we kinda get shoved to the bottom of the pike, but they did promise me "soon."  If it isn't soon I may have to go to plan "B." 

Offline simonhk

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 15
Re: Right side carb and clutch cover
« Reply #51 on: October 19, 2021, 08:31:43 PM »
Thank you for the update banana

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #52 on: January 09, 2023, 05:28:33 PM »
OK.  Finally have another bunch of these nearly done.  First batch that we had cast were ok and had test mounted a few of them on one  of my GTRs and then sent them off to be polished.  The polisher did a job that I wasn't pleased with so we started over.  Have another set of castings machined and are.now.at.a.different polisher.  HOPEFULLY I will have them ready to go in a few.weeks. I have posted a pic of the rough castings on the Bridgestone Motorcycles group on Facebook if you want to have a look.  I have been chasing this project for way too long and maybe we will soon have these available.  If I manage to figure out what I have to do to post pics on this sight I will,put them up here.

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2269
Re: Right side carb and clutch cover
« Reply #53 on: January 09, 2023, 05:51:01 PM »
Here ya go Richard L.

[attachment deleted by admin]
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1314
Re: Right side carb and clutch cover
« Reply #54 on: January 10, 2023, 08:37:38 PM »
One for me to support this project.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline cknight

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 23
Re: Right side carb and clutch cover
« Reply #55 on: January 11, 2023, 10:37:56 AM »
I'll take s polished one.    Chase

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #56 on: February 04, 2023, 03:14:05 PM »
Finally I have 50 of these covers polished and ready to go.  The polishing around the edge isn't perfect but isn't bad.  Pics are posted in the Bridgestone group on facebook.  Sorry I haven't posted the pics here but I just cannot seem to make that happen.  I just spent an hour and I am missing something!  So again if someone wants to copy them from facebook or I can send them to you by email.
  Anyhow these are available at $225 including priority shipping in the U.S.  I have another 20 that am calling seconds in that they have had the edges polished too far.  They bolt up and fit right and are not unattractive.  They are availably for$125.  Again that includes priority shipping on the U.S.   My email is brakelate@hotmail.com   I am more than happy to answer questions or send photos.  We have order another batch of castings, hoping to refine the polishing.  When (or even if ever)they will be available is hard to predict but I would guess late 23 or early 24.                 

Offline Jeff Bar

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 485
Re: Right side carb and clutch cover
« Reply #57 on: February 05, 2023, 01:58:19 PM »
Nice job, hopefully many will step up to the plate Jeff Bar

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 141
Re: Right side carb and clutch cover
« Reply #58 on: February 05, 2023, 11:34:12 PM »
Great effort, and I hope it gets rewarded. I'm down for a couple. Email on the way!
'65 BS Homer 50, '69 Mk II RS, '67 GTR, '70 GTO, '75 Taka 100, '69 Mk II SS.

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #59 on: February 10, 2023, 07:39:51 AM »
Was just looking at this and realized I didn't list my contact information. 

  email is   brakelate@hotmail.com

   mailing address is Richard Ladrach
                              4277 Boltz Orchard RD SW
                              Sugarcreek OH 44681
           
  phone number   330-432-7274

                   

 


Gallery


Views:1150
Comments (0)
By: hod928

Views:1194
Comments (0)
By: hod928

Views:1196
Comments (0)
By: hod928

Views:1461
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Gto
Date: 03/02/2024 06:49 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal