Bridgestone Motorcycle Parts Discussion Board

Bridgestone Tech Talk => 350 Talk => Topic started by: Realfish on August 25, 2016, 09:14:41 PM

Title: 1971 350 GTO Oil Reservoir
Post by: Realfish on August 25, 2016, 09:14:41 PM
can anyone help me find a oil reservoir.  I'm trying to rebuild my elderly neighbors bike that he purchased in 71.  found 2 cracks in the original tank

also looking for a points cover and the right side clutch cover that was cracked when he brought it over.

any help would be appreciated!

thanks again
Title: Re: 1971 350 GTO Oil Reservoir
Post by: OldSwartout on August 26, 2016, 08:47:22 AM
I have a spare. It has been cracked around the ends of the strap on the back, but brazed and should work fine. It's very clean inside, but needs a new oil level window, which Richard Clark has. It still has the original faded red paint.  Free, just pay shipping. PM me if interested.
Title: Re: 1971 350 GTO Oil Reservoir
Post by: Mike Anderson on August 26, 2016, 09:12:57 AM
Hi,
Are you looking for the metal red tank that goes on a GTR or the plastic tank for a GTO? I can probably help you with a right side carb cover if that is what you need. They are pretty pricey since most of them are broken. Richard probably has the points covers. Give me a call.
Later Mike  (317)729-2418
Title: Re: 1971 350 GTO Oil Reservoir
Post by: Realfish on August 26, 2016, 08:04:11 PM
hello mike

here is a pic of the cover i was talking about.  it covers the clutch plates

i am interested in the points cover, who did you say on that?

also i purchased some epoxy plastic bonder to see if i can do something with the oil tank.

thanks to everyone for the replies!
Title: Re: 1971 350 GTO Oil Reservoir
Post by: moonpup on August 26, 2016, 08:08:18 PM
If you're not going for show quality, that cover can always be bondo'd up and painted.

Just say'n...  ;D
Title: Re: 1971 350 GTO Oil Reservoir
Post by: Mike Anderson on August 26, 2016, 08:54:51 PM
Richard Clark the site owner has a new oil tank. You should contact him on the tank, possibly a fuel tap etc. I can help with a nice carb cover but they are a little pricey due to the fact that most got broken. Let me know if I can help. Call me.
Good Luck, Mike  (317)729-2418