Author Topic: New Member and float levels 175 DT  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

PatK

  • Guest
  • Trade Count: (0)
New Member and float levels 175 DT
« on: August 19, 2018, 02:27:50 PM »
Hi Everyone, may I introduce myself. I live in Dorset, UK, England and I'm hoping that one kind member may be able to help me.  I'm writing on behalf of an 88 year old gentleman that does not have a computer and therefore can't contact you himself. He is 88 years old, does not have any internet access, BUT, he does have 12 bikes and rides them regularly, ranging from WW2 bikes, a Triumph thunderbird, a Honda 400 four and of course his Bridgestone Dual Twin 175cc, 1966 model year.  He loves the Bridgestone and does all the maintenance on all his bikes and recently two of his bikes were a feature article in Classic motor cycles, UK.
However his only problem with the 175cc Dual twin is that he is unable to find out in any publication, what the correct float height is in the carburettor float chamber. I wonder if one of you clever people would be able to give me that info, so that I can make an 88 year old biker really happy.!
Thank you very mush for reading my first post.
Patrick


Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2268
Re: New Member and float levels 175 DT
« Reply #1 on: August 19, 2018, 03:02:42 PM »
Couldn't find any info on float height in either the service manual or the owners manual here in the downloads.

Got this from another publication...... (make sure bowl gasket is removed when measuring)

[attachment deleted by admin]
« Last Edit: August 19, 2018, 03:04:59 PM by moonpup »
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline RayK

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 569
Re: New Member and float levels 175 DT
« Reply #2 on: August 19, 2018, 07:09:45 PM »
Patrick
On page 45 of the Clymer manual it states that the BS 175 DT float level setting should be 23/32 inch. We use mm in Australia and this converts to 18.26 mm. We changed to metric in 1972. As Mike advises it also states 'measure the distance between gasket seat and top of float with a vernier scale'
I hope this helps
RayK
BS 175DT, BS 50 Sport x 1, BS 90 Mountain x 3, BS 90 Deluxe, BS 90 Sport x1, BS 60 Sport, BS 90 Trail, BS100 Sport.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 951
Re: New Member and float levels 175 DT
« Reply #3 on: August 20, 2018, 10:24:41 AM »
            The gaskets often beak up when removed from carb base.  I would leave them in place and knock 1/32'' off the float height to compensate, 23-1 = 22/32'' or 11/16''. I make that 17.4mm.    Measure float height with float resting on the needle without compressing the spring.  Not a bad idea to apply sealant to float bowl when reattaching, joint tends to leak. Blue Hylomar works well.                               Just a suggestion, Brian.
« Last Edit: August 22, 2018, 06:13:33 AM by BRT-GTR »
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

PatK

  • Guest
  • Trade Count: (0)
Re: New Member and float levels 175 DT
« Reply #4 on: August 20, 2018, 01:55:18 PM »
Many Thanks, Moonpup, Ray and Brian, that is exactly what I was looking for, and Ron, my dear old friend will be over the moon, as he had given up on ever finding the settings. What a great Club, thank you all once again.
Patrick

Offline Steve Swan

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 110
Re: New Member and float levels 175 DT
« Reply #5 on: August 22, 2018, 10:13:08 PM »
Couldn't find any info on float height in either the service manual or the owners manual here in the downloads.

Got this from another publication...... (make sure bowl gasket is removed when measuring)

Mike, i have these for my old Yamaha's can't remember where i got them....  Do you have this type of handout for the GTR?  Thanks in advance!

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2268
Re: New Member and float levels 175 DT
« Reply #6 on: August 22, 2018, 11:20:44 PM »
Hi Steve,

Here's the equivalent page for the 350's.

Both are found in Clymer's Vintage Collection Series (Two Stroke Motorcycles)

[attachment deleted by admin]
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline Steve Swan

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 110
Re: New Member and float levels 175 DT
« Reply #7 on: August 23, 2018, 10:38:39 AM »
Thank you Mike, I've not seen that book, the ones i have for Yamaha's are old single pages that came with some stuff with a motorcycle i bought.

 


Gallery


Views:664
Comments (0)
By: hod928

Views:669
Comments (0)
By: hod928

Views:646
Comments (0)
By: hod928

Views:819
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
Deleted

Price: $0.00
Date: 06/12/2024 07:57 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal