Bridgestone Motorcycle Parts Discussion Board

Bridgestone Tech Talk => 350 Talk => Topic started by: fahrkle on May 01, 2018, 09:09:50 PM

Title: 350 GTO
Post by: fahrkle on May 01, 2018, 09:09:50 PM

Soooooooooo - My GTO has the original frame neck sticker and numbers stamped on frame neck and they match. I canNOT find numbers stamped in the engine case where they normally are - Any thoughts? I am also looking for a set of handlebars and a center stand.

Title: Re: 350 GTO
Post by: moonpup on May 01, 2018, 09:51:31 PM

Do you mean where they "normally are" on the smaller cc bike engines or on the 350 engines?

Title: Re: 350 GTO
Post by: BRT-GTR on May 02, 2018, 09:31:24 AM

            350 engine numbers can be difficult to see, they were lightly stamped. Should be just inside of the r/h,  rear engine mount, under the corner of the oil tank/outlet pipe on a GTO. Torch needed.
           We are not sure if replacement crankcases came pre-numbered.                                           Brian.

Title: Re: 350 GTO
Post by: fahrkle on May 02, 2018, 10:02:19 AM

That is where I looked but I am not seeing anything.

Title: Re: 350 GTO
Post by: coxy on May 02, 2018, 04:30:26 PM

there was a nos set of crank cases on ebay a few years back they were not stamped