Bridgestone Motorcycle Parts Discussion Board
Bridgestone Tech Talk => 350 Talk => Topic started by: scott on May 28, 2009, 01:07:45 AM
-
I took apart my 350 gtr motor. split the halves and cleaned out the inside housings and gears. i did not take any of the trans gears out. just the kick shaft to replace the spring and catch piece.i put the halves back together and i am wonering why the kick shaft wants to turn when i turn the crank shaft. it will ratchet sound on way.the other way it will seem to snap with a revolution of the crank. i am thinking that there shouldnt be any involvment when i turn that piston crank up and down. the kick starter should not be interacting when the engine is turning. i need some help on this. anyboby have any expertice. thanks, ??? scott.
-
Scott The 350 KS shaft needs to be installed correctly otherwise it will turn all the time and break the spring, if fits in the case
a certain way, just play with it, upon installation and you will "see" it
Sam Keys