Author Topic: 200 Speedo Set up  (Read 2570 times)

0 Members and 1 Guest are viewing this topic.

Offline scott demauex

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 44
  • 864-640-3059
200 Speedo Set up
« on: March 05, 2021, 06:27:35 PM »
I have seen where you can buy a new speedo that says it is for a 200. When I look at them I do not see the black outer that surrounds them . Like when I see the set up
mounted to a bike. I see used units for sale that have a black surround to it. Is the speedo generic for a 175 and a 200 . There is no detail in the parts catalog or the special light publication. Is it something you have to get off a used unit ? Anyone know the deal here ?

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1314
Re: 200 Speedo Set up
« Reply #1 on: March 06, 2021, 09:42:12 AM »
The speedo is the same for all 175- 200 bikes. The black surround is a separate housing for the 200's that does not seem to be in any parts book. If you don't have one, a used one is the best bet.  Some others on here may have figured out a part number or have a used one.
« Last Edit: March 06, 2021, 09:44:10 AM by OldSwartout »
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2269
Re: 200 Speedo Set up
« Reply #2 on: March 06, 2021, 10:11:57 AM »
The black surround is in the parts manual (pg. 40-41), and is #22 in the illustrations with part number 3474-8200. A cushion rubber and bracket are also needed and shown in the manual as well.

In addition, the illustrations for the 175 and 200 speedometers look nothing alike and each has a different part number.  8401-8000 for the 175 and 8401-8200 for the 200.

See pics below.....

[attachment deleted by admin]
« Last Edit: March 07, 2021, 10:39:01 AM by moonpup »
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline scott demauex

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 44
  • 864-640-3059
Re: 200 Speedo Set up
« Reply #3 on: March 06, 2021, 05:31:08 PM »
Ok men I don’t know if my copy of the parts Manuel is an old one but it detailed all of that but the speedo set up. So once again thanks for the aid . I had bought a new speedo
Sand I will have to see which one I have. Seems the best way is to buy the complete hook up and then see if the speedo works. Thanks to all .

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1314
Re: 200 Speedo Set up
« Reply #4 on: March 06, 2021, 08:10:40 PM »
Apparently, my manual was old also. Those pages moonpup posted were good info to have. The basic speedometer is the same but I had no idea the housing was part of the assembly.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline scott demauex

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 44
  • 864-640-3059
Re: 200 Speedo Set up
« Reply #5 on: March 15, 2021, 05:11:04 PM »
So thanks to Moonpup we are updated ! So I bought a nice used one on Ebay. I am guessing the black should be flat or semi gloss . Can someone confirm?

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 141
Re: 200 Speedo Set up
« Reply #6 on: March 18, 2021, 02:08:29 PM »
Scott; My 200RS has an almost textured appearance, and I would categorize it as a semi-gloss.
'65 BS Homer 50, '69 Mk II RS, '67 GTR, '70 GTO, '75 Taka 100, '69 Mk II SS.

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1314
Re: 200 Speedo Set up
« Reply #7 on: March 19, 2021, 03:48:05 AM »
Mine, too. It looks about the same as the 350 speedo shell. I'd call it a mild wrinkle finish. A good semi-gloss regular paint wouldn't look much different, though, and would be easier to find.

Edit: looking closer my 350 speedo and tach shells are just flat black. Only the 200 looks like a wrinkle finish.
« Last Edit: March 20, 2021, 09:42:58 AM by OldSwartout »
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

 


Gallery


Views:1138
Comments (0)
By: hod928

Views:1181
Comments (0)
By: hod928

Views:1186
Comments (0)
By: hod928

Views:1446
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Gto
Date: 03/02/2024 06:49 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal