Parts for re chroming.Refurbished GTR petrol cock.Engine back in the frame 2.
Refurbished GTR petrol cock.
Previous Image | Next Image
Description: This GTR petrol cock had suffered with age, the original brass tubes had split and the mesh filters disintegrated. Firstly I cleaned the tap using an ultrasonic bath.
I replaced the tubes and fitted new nylon mesh filters, all secured by an epoxy type bond, this was then painted over with POR-15 to protect against the petrol.

Stats:
Views: 652
Total Favorities: 0 View Who Favorited
Posted by: Guest 
Total Likes: 0
Share


Image Linking Codes
BB Code
Html Link

Comments (6) rss

Guest
August 11, 2014, 01:44:54 PM
Yes that's the reason, lot less hassle.
moonpup
Laidback Purist
Master Registered Bridgestone Member
*****
Online Online

Posts: 2266



View Profile
August 11, 2014, 10:33:27 AM
I take it you went this route because it was maybe less hassle than reproducing the brass screens like you did previously?
Guest
August 11, 2014, 03:59:11 AM
Yes Bert, that's how I did it.
I made the small one first then fitted it and applied a small amount of the epoxy type bond to secure it's location, the following day when it had fully cured  I made the longer one and fitted that. I then filled the base sub flush and let that cure.
Then I gave all the joints a generous coat of POR-15.
slawsonb
Master Registered Bridgestone Member
*****
Offline Offline

Posts: 1398



View Profile
August 10, 2014, 08:30:49 PM
So what appears to be a metal collar holding the filter on the longer tube is, in fact, Epoxy coated with POR? Clever! (Can't see the shorter tube as well, but expect it is the same trick, right?)
...bert
Guest
August 10, 2014, 06:16:52 AM
To remove the old brass tubes I used a Dremell with a small rotary burr fitted,the material surrounding the pipes is lead so I could easily remove most of the lead supporting the pipes before I could pull them out.
If you go down this route don't remove too much lead as you need the original holes to locate the new brass tube.
I got the brass tube from a model maker on eBay, I also got the nylon petrol filters off eBay.

http://stores.ebay.co.uk/Macc-Model-Engineers-Supplies-LTD?_trksid=p2047675.l2563

http://stores.ebay.co.uk/Bertrums-bike-bits?_trksid=p2047675.l2563
Last modified by: August 10, 2014, 06:23:35 AM
moonpup
Laidback Purist
Master Registered Bridgestone Member
*****
Online Online

Posts: 2266



View Profile
August 09, 2014, 04:46:08 PM
How did you get the old brass tubes out?



Powered by SMF Gallery Pro

Gallery


Views: 344
Comments (0)
By: Jon West

Views: 1475
Comments (0)
By: rwgibbon

Views: 1809
Comments (0)
By: Perry L Anderson

Views: 1876
Comments (0)
By: Perry L Anderson

Classifieds

BS 175 DT Carburettors Mikuni VM 17 s

Price: 180.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 180.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal