Bridgestone Motorcycle Parts Discussion Board
Bridgestone Tech Talk => 350 Talk => Topic started by: Sye on January 04, 2016, 09:38:02 AM
-
Just a heads up really. I have a damaged bulb holder on the speedo, so I was looking for a replacement and found them from the strangest place and cheap too. They fit perfectly and are just the job. the UK link is here:
http://www.ebay.co.uk/itm/161509444565?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (http://www.ebay.co.uk/itm/161509444565?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
and the US link is here:
http://www.ebay.com/itm/NEW-SPEEDOMETER-SPEEDO-TACHOMETER-INSTRUMENT-BULB-HOLDER-YAMAHA-RD350-RD250-UK/161509444565?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20131017132637%26meid%3Db103d7f35adc43f7b9d95dbf85ed81a9%26pid%3D100033%26rk%3D1%26rkt%3D4%26sd%3D161509444565 (http://www.ebay.com/itm/NEW-SPEEDOMETER-SPEEDO-TACHOMETER-INSTRUMENT-BULB-HOLDER-YAMAHA-RD350-RD250-UK/161509444565?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20131017132637%26meid%3Db103d7f35adc43f7b9d95dbf85ed81a9%26pid%3D100033%26rk%3D1%26rkt%3D4%26sd%3D161509444565)
Free shipping from India arrived in ten days. the quality is fine and the fit is excellent.
You get two holders connected into one but they are easilly separated so you get two. Good to go. :D
-
Sye,
Great find, been looking for these for some time. Some weird & wonderful items on that site, the power of the internet/Ebay. ;D
Brian
-
Thanks Sye, I've been looking too. Used electrical tape which doesn't hold too well. I'll get the order out for these. Harry
-
Sye, Just sent the order out. Price great. No shipping charge. Thanks for the heads up. Harry
-
Harry,
The rubber bulb holders are fine and provide a good replacement for the original BS items.
Just be aware, when mine came the wires from the two bulb holders had been paired about 3 inches from the holders with only twisted wire joints >:(.
Not a problem for use on the BS because you have to separate them anyway and solder on the correct wires but if used as they come on another make of bike, I would strip off the tape and solder the joints.
Still a great find and reasonable price. ;D
Brian.
-
Thanks for the info. Brian. They haven't arrived yet but I'll save your suggestions for the when they do. Harry