Bridgestone Motorcycle Parts Discussion Board

Bridgestone Tech Talk => 350 Talk => Topic started by: cknight on June 17, 2020, 02:05:41 PM

Title: 350 clutch housing ring nut
Post by: cknight on June 17, 2020, 02:05:41 PM

As I haven't accumulated a hoard of genuine Bridgestone tools over the decades, I needed the wrench for the ring nut holding the clutch housing. The local O'Reilly's had a selection of lock nut sockets, and the W1271  2-3/8" 1/2" drive item fit perfectly. The other chain stores should also have an equivalent.
Also, the left hand pinion gear nut on my engine has a 29mm hex, not a 28mm as listed in the manual. Is this something later, or??
Thanks,  Chase

Title: Re: 350 clutch housing ring nut
Post by: hardy on July 06, 2020, 06:40:14 AM

Thanks Chase, we’ll hunted out!

I made one years ago, but I’m sure this info will help out other members!

Title: Re: 350 clutch housing ring nut
Post by: Kenneth Pagel on July 08, 2020, 11:32:43 AM

I also bought that tool from O'Reily's. Will come in handy in the future.