Bridgestone Motorcycle Parts Discussion Board

Bridgestone Tech Talk => 50, 60, 90 & 100 Talk => Topic started by: joeonthego717 on January 26, 2021, 12:57:58 AM

Title: Measure a clutch pin for me PLEASE
Post by: joeonthego717 on January 26, 2021, 12:57:58 AM
I somehow lost this part when I was working on it. I'm going to cut the bottom end of a drill bit that matches the OD and cut it to length. Could someone please measure this part for me? It shouldn't take much work to get out and put back in. I would really appreciate it! Don't let the IMG scare you, all that stuff on the right is deep in it, the pin I'm talking about is like the third part to come off.
Part #16
(https://i.postimg.cc/FKX6mj7z/Screen-Shot-2021-01-25-at-11-54-33-PM.png) (https://postimg.cc/rDgjNRG2)
Title: Re: Measure a clutch pin for me PLEASE
Post by: OldSwartout on January 26, 2021, 07:29:26 PM
It's identified in the parts catalog as 6 x 10 mm.  That same part is also used in the 175 and 350 clutch actuation.
Title: Re: Measure a clutch pin for me PLEASE
Post by: joeonthego717 on January 27, 2021, 02:07:58 PM
it says 6x10 pin, you're saying that's its measurement in mm?
Title: Re: Measure a clutch pin for me PLEASE
Post by: OldSwartout on January 28, 2021, 09:11:32 AM
Yes. 6mm diameter, 10 mm long.
Title: Re: Measure a clutch pin for me PLEASE
Post by: joeonthego717 on January 29, 2021, 03:13:25 PM
Cool thanks