Author Topic: BS 100 SR Progress  (Read 9630 times)

0 Members and 1 Guest are viewing this topic.

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
BS 100 SR Progress
« on: September 22, 2015, 06:45:02 PM »
I just added a few photographs of the progress of the SR 100.
I installed the seat and switch. (little by little)
On to getting it ready to run.

I'll keep you posted.

Randy

Offline Mopar392

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 158
Re: BS 100 SR Progress
« Reply #1 on: September 22, 2015, 08:51:32 PM »
Once Again Randy, Very Nice!

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: BS 100 SR Progress
« Reply #2 on: September 22, 2015, 09:36:18 PM »
It's looking great, Randy!
...bert

Offline Mopar5426

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 324
Re: BS 100 SR Progress
« Reply #3 on: September 22, 2015, 10:40:22 PM »
  When You Get It Done Will Have To Race   
Looks Great

I Always Like The Little Bikes   (especially racers)
Love Photos
GENE

Offline RayK

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 569
Re: BS 100 SR Progress
« Reply #4 on: September 22, 2015, 10:52:15 PM »
Nice work Randy, sadly no SRs were sold by dealers in Australia (that I know of).  Although the Hodaka Super Rat 100 was sold here. Similar to the SR 100 with a Duplex tubular frame.

I see the SR 100 has a 12 volt system. Is it Pre-mix or Oil Injection? I note that you have a good parts supply also - lucky chap  :) :) :)
Cheers
RayK
« Last Edit: September 23, 2015, 04:23:12 AM by RayK »
BS 175DT, BS 50 Sport x 1, BS 90 Mountain x 3, BS 90 Deluxe, BS 90 Sport x1, BS 60 Sport, BS 90 Trail, BS100 Sport.

Offline Mike Anderson

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 859
Re: BS 100 SR Progress
« Reply #5 on: September 23, 2015, 06:18:13 AM »
Looking better all the time Randy, anxious to get back on mine. Keep teasing with the pictures.
Later Mike

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: BS 100 SR Progress
« Reply #6 on: September 23, 2015, 07:55:20 AM »
Ray,

No oil injection. You pre-mix the fuel.

Randy

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: BS 100 SR Progress
« Reply #7 on: February 20, 2016, 04:11:10 PM »
I have added a few photographs of the tank now back on the bike. I have to decide if I am going to having it painted or leave it all chrome.
The photographs are under the SR section.

Offline Mike Anderson

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 859
Re: BS 100 SR Progress
« Reply #8 on: February 20, 2016, 05:22:01 PM »
Hi Randy,
Looks like they did a great job. Far nicer than original, looks like it could blind you in the sun. You will probably choose paint after the first walk around with it on the bike without paint. Really nice.
Later Mike

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 345
  • CL-100
Re: BS 100 SR Progress
« Reply #9 on: February 21, 2016, 08:14:48 AM »
Randy,

Tank looks great and the quality of the work seems to be on par with my experience using the now defunct Brown's Plating. 

Have you done any research on a paint match for the red on the SR's?

Rowland

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: BS 100 SR Progress
« Reply #10 on: February 21, 2016, 08:17:49 AM »
Rowland,

If I do decide to have it painted, I have a NOS red side cover
I'm going to tell the painter to match.

I hope by doing that the color will be close.

Randy

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1105
Re: BS 100 SR Progress
« Reply #11 on: February 21, 2016, 04:08:06 PM »
Nice job. I have various nos painted parts and they all vary in the metal flake.
Eg .the Nos tool box for the 175 is lighter and has more flake than 175 fork ears and vary sightly with  finer flake than the headlight bucket. I have a gold nos 350 side cover which has more corse flake than the  candy red nos parts. The house of kolor candy red which I just bought is prettywell a match to the gold flake. Though I don't know if the actual gold is factory or was painted by  a distributor of the time.

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: BS 100 SR Progress
« Reply #12 on: May 12, 2016, 11:47:43 AM »
I just added a couple photographs of the finished restoration of
my Bridgestone 100 SR Factory Racer. (in SR Photo's)

As soon as I have an assistant I will post a video with it running.
It is very loud!!!!!

I will be staring on my Bridgestone 175 SR Factory Racer next.
I will be posting photographs in the near future.

Randy

Offline Mike Anderson

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 859
Re: BS 100 SR Progress
« Reply #13 on: May 12, 2016, 01:57:10 PM »
Hey Randy,
Anxious to hear it running. I have never heard one run before. Can't wait till I get to start mine. Just to wheels and tires to the shop today for mounting. Once it is on wheels completion will come quickly I hope.
Later Mike

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: BS 100 SR Progress
« Reply #14 on: May 26, 2016, 06:00:06 PM »
I just sent my only Bridgestone SR 100 clutch cable to Motion Pro
to be reproduced. I tried sending them photographs and a diagram
with dimensions but they need the actual cable.

They may need to use the original tightener, if they can't match it.

I have my fingers crossed.

The original cable was very yellowed and cracked in two locations.
It worked. But it didn't match the other cables in appearance.

I'll keep everybody posted.

I will also post a few pictures of the SR 175 I have started to restore.

Thank you for your service to all the veteran's out there.

Randy

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: BS 100 SR Progress
« Reply #15 on: May 26, 2016, 08:47:00 PM »
Randy, I have used Motion Pro to reproduce and build custom cables. They are very capable. Always best to be concerned, but my bet is it'll turn out great.
...bert

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: BS 100 SR Progress
« Reply #16 on: May 27, 2016, 07:31:35 AM »
Thanks Bert.

Fingers crossed.

Have a great weekend and Memorial Day.

Randy

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: BS 100 SR Progress
« Reply #17 on: May 27, 2016, 11:18:11 AM »
Same to you Randy and everyone in the BS Brotherhood!
...bert

 


Gallery


Views:534
Comments (0)
By: hod928

Views:532
Comments (0)
By: hod928

Views:527
Comments (0)
By: hod928

Views:693
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
Deleted

Price: $0.00
Date: 06/12/2024 07:57 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal