Author Topic: 90/100 engine assembly  (Read 3625 times)

0 Members and 1 Guest are viewing this topic.


  • Guest
  • Trade Count: (0)
90/100 engine assembly
« on: September 19, 2014, 10:04:45 AM »

Here's my little tip then for assembling the crankcases of a 90 or 100 engine.

It can be a bit fiddly trying to hold the kickstart shaft in place while trying to ease the cases together. If you let it go, it all slips out of place.

Before you start asembling then, simply locate the kickstart shaft in place and put a jubilee clip around it, so it's up tight to the the case to stop it all falling out when you turn it upside down to assemble. By doing it this way, you can concentrate on making sure it all goes together well without fear of the shaft slipping out.



  • Guest
  • Trade Count: (0)
Re: 90/100 engine assembly
« Reply #1 on: November 19, 2018, 02:28:30 AM »
Hi Stu,
What is a "jubilee clip"?



Offline AlanJohn

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 216
Re: 90/100 engine assembly
« Reply #2 on: November 19, 2018, 05:03:43 AM »
Basically it's a metal zip tie.
Or at least does the same job.



Comments (0)
By: Jon West

Comments (0)
By: rwgibbon

Comments (0)
By: Perry L Anderson

Comments (0)
By: Perry L Anderson


BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal