Author Topic: Throttle cable for a TMX  (Read 2085 times)

0 Members and 1 Guest are viewing this topic.

Offline brandonwsmith

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 2
Throttle cable for a TMX
« on: August 27, 2019, 10:26:22 AM »
Hello all,
 What I thought would be an easy thing to find has turned into a difficultly.
What would be the best option for a throttle cable replacement? The one I have has the 90 degree fitting that screws into the grip and this is where the trouble is.  All the cables I find do not have this?
Any ideas or leads would be appreciated!
Brandon

Offline Jeff Bar

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 485
Re: Throttle cable for a TMX
« Reply #1 on: August 27, 2019, 12:43:47 PM »
See that banner many pages of the site that states: CLICK HERE FOR PARTS

https://bridgestonemotorcycleparts.com/index.php?action=ezportal;sa=page;p=1


Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 141
Re: Throttle cable for a TMX
« Reply #2 on: August 27, 2019, 02:41:34 PM »
Brandon; download a parts and a service manual from the downloads portion of this site, as I did. Then determine the correct part number for your cable and email Richard Clark for price and availability. He'll have it. He is typically a little slow with responses, so be patient. He also sells parts on EBay, so you may be able to contact him through a contact from one of his current auctions. They seem to monitor that.
'65 BS Homer 50, '69 Mk II RS, '67 GTR, '70 GTO, '75 Taka 100, '69 Mk II SS.

Offline TMX_Maverick

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 22
  • 1970 Bridgestone 100 TMX
Re: Throttle cable for a TMX
« Reply #3 on: February 24, 2022, 12:33:44 PM »
Sorry... I know this is an old thread, but I was just about to post about the same problem, but with a slight twist...

I DID order the right throttle cable P/N from Richard, according to the parts catalog downloads. But it also does not have the required 90-degree thread-in elbow, just like the original poster was asking about. Even the catalog pictures do not show it.

So I was going to ask how in the world I was supposed to get the old elbow off my old cable (I ended up just snipping the old cable) and get it on the new cable, because it looks impossible. The cable ferrule is too big to slide through the elbow.

I first tried by pulling the black plastic Y-connector cover apart and unclipping the two lower cables from the white nylon connector inside, thinking that maybe I could then disconnect the upper cable from it and pull it out of the sheath... but no go. The upper cable won't unclip from the white nylon connector because the ferrule was crimped on after passing through the connector's center hole.

I guess I'll have to cut the ferrule off, but the elbow on, and crimp a new ferrule on. Doesn't sound like a reliable workaround, but I've had some of these new parts from Richard laying around for 10 years (life happens) and if this one was a mismarked part number, I'm probably just out of luck exchanging it.

Am I missing something?

Offline TMX_Maverick

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 22
  • 1970 Bridgestone 100 TMX
Re: Throttle cable for a TMX
« Reply #4 on: March 01, 2022, 12:34:29 PM »
Okay, problem solved (at least close).

I found an old post from the late disc_valve (Graham Weeks), where he said that the later model 100 TMXs like mine changed to a 22mm handlebar. It's noted in a Rockford Motors service bulletin.
With that change, the controls/cables changed to the part numbers on the 350 having the same bars.
Therefore the throttle cable part number for the late-model TMXs with the 22mm handlebars is 6176-5610 (not the 6176-5081 listed in the parts catalog).

The 6176-5610 throttle cable comes with the 90-degree fitting that threads into the throttle control, as the OP was requesting.

Now I just hope Richard still has one. If so, I'll put my (incorrect) 6176-5081 up for sale.

 


Gallery


Views:1148
Comments (0)
By: hod928

Views:1192
Comments (0)
By: hod928

Views:1194
Comments (0)
By: hod928

Views:1459
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Gto
Date: 03/02/2024 06:49 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal