Check out the MANUALS/ARTICLES section for MANUALS and ARTICLES
0 Members and 1 Guest are viewing this topic.
Jens, here's some previous discussion on 350 sprockets.....http://bridgestonemotorcycleparts.com/index.php?topic=3301.msg17057#msg17057
The front sprocket for a Kawasaki F9 (350 single dual sport from the early 70's) will fit. The only issue is that the F9 used a nut to hold the sprocket on, therefore the sprockets don't have the 3 holes for the retainer bolts. You can either drill and tap the holes in metal with a VERY hard surface, or find a heavy-duty snapring to hold it on the shaft. The good thing is that sprockets are available in nearly any size (at least in the U.S.).