Author Topic: A Few Parts Needed To Finish a GTR-Help!  (Read 783 times)

0 Members and 1 Guest are viewing this topic.

Offline Kenneth Pagel

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 273
  • What, me worry?
A Few Parts Needed To Finish a GTR-Help!
« on: February 11, 2023, 06:18:29 PM »
Need the folowing to complete my '67 GTR:

6 of 0311-0525 air cleaner housing screws-early JIS, and very hard to find.
3 of 0311-0510  air filter element screen screws
1 of 0121-0506 hex bolt, muffler baffle
1 of 09511-149 12X45 hex bolt
1 of 0142-1220 Hex bolt D

Tried requesting these through Richard's 6X6 site, but no response. Any help appreciated, especially on the obsolete JIS hardware. Thanks!

« Last Edit: February 11, 2023, 06:32:38 PM by Kenneth Pagel »

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2264
Re: A Few Parts Needed To Finish a GTR-Help!
« Reply #1 on: February 11, 2023, 06:59:26 PM »
You can find the m5 screws with the 0.9 pitch here...
https://www.zed-parts.com/jis-phil-pan-head-pre-1967-pitch-sc
Then search the site for any of the other bits you need.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline Kenneth Pagel

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 273
  • What, me worry?
Re: A Few Parts Needed To Finish a GTR-Help!
« Reply #2 on: February 11, 2023, 08:16:59 PM »
Thanks, moonpup!

Offline Kenneth Pagel

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 273
  • What, me worry?
Re: A Few Parts Needed To Finish a GTR-Help!
« Reply #3 on: February 18, 2023, 04:38:30 PM »
Regarding the 12X45 and 12X20 hex bolts that secure the seat: Are these coarse or fine thread?

Thanks in advance.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 950
Re: A Few Parts Needed To Finish a GTR-Help!
« Reply #4 on: February 19, 2023, 09:53:31 AM »
   
       All the 12mm JIS bolts on the GTR have a 1.5mm thread pitch.  Current ISO 12mm bolts have a 1.75mm pitch.

       It is classed as a fine thread but check with the supplier because a 12 x 1.25 fine pitch is also available.
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline Kenneth Pagel

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 273
  • What, me worry?
Re: A Few Parts Needed To Finish a GTR-Help!
« Reply #5 on: February 21, 2023, 02:37:37 PM »
Thanks, Brian, for the info!

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: A Few Parts Needed To Finish a GTR-Help!
« Reply #6 on: February 24, 2023, 10:18:48 AM »
Did you try certified parts corporation?

 


Gallery


Views:48
Comments (0)
By: Jon West

Views:1186
Comments (0)
By: rwgibbon

Views:1492
Comments (0)
By: Perry L Anderson

Views:1568
Comments (0)
By: Perry L Anderson

Classifieds

Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:
Gto
Date: 10/19/2023 01:08 pm
Time Left:
Urgent - l/end roller bearing & piston pins needed
Date: 10/08/2023 03:25 am
Time Left:
197? Tora

Price: $2100.00
Date: 10/02/2023 10:24 am
Time Left:

Recent Downloads added

Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM

Powered by EzPortal