Author Topic: Right side carb and clutch cover  (Read 13593 times)

0 Members and 1 Guest are viewing this topic.

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: Right side carb and clutch cover
« Reply #20 on: February 19, 2020, 09:01:35 PM »
I've been on the fence since I have 2 NOS covers. But this is a good cause, and the points made by my brethren members have convinced me to join up. Put me down for one. BS350s Forever!!
...bert

Offline cknight

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 23
Re: Right side carb and clutch cover
« Reply #21 on: February 21, 2020, 12:12:02 PM »
I'll take one..   Thanks,   Chase

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1316
Re: Right side carb and clutch cover
« Reply #22 on: February 21, 2020, 03:39:47 PM »
I'll take one.  Karl
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 951
Re: Right side carb and clutch cover
« Reply #23 on: February 22, 2020, 05:14:58 AM »
   Hi DL
         Don't wish to interfere but was thinking. In light of what we know about original covers, new covers would benefit from being made slightly thicker on outerside, the clutch vent slot (later rubber plugged) near rear 5mm screw hole can be eliminated and  make from an alloy that can be readily welded !
         Just my thoughts,   Brian.
« Last Edit: February 22, 2020, 05:16:50 AM by BRT-GTR »
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline old smokey

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 709
Re: Right side carb and clutch cover
« Reply #24 on: February 28, 2020, 10:13:05 PM »
I would be in for (1) 350 right side cover. Sorry, don't log in here too often anymore as my bike is sitting in the corner gathering dust. Not enough $$, not enough time, not sure it's safe to ride a motorcycle around Phoenix....but I would still like a good cover!
'67 350 GTR undergoing repairs with a '75 Yamaha TX500 front end

Davitt

  • Guest
  • Trade Count: (0)
Re: Right side carb and clutch cover
« Reply #25 on: March 01, 2020, 08:16:12 AM »
I've just logged in specifically to answer this- I need one, I'm in!
Looking forward to using this forum more as my 71 GTR restore moves along.

Thanks!!

Davitt

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #26 on: March 06, 2020, 05:35:33 AM »
There is a used right side clutch/carb cover just in on ebay. looks to be decent shape.  I listed the link below.


https://www.ebay.com/itm/R-S-Carburetor-Cover-And-Screws-350-GTO-GTR-Bridgestone-721/202923459057?hash=item2f3f2e41f1:g:3QgAAOSwt3teYY61

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1316
Re: Right side carb and clutch cover
« Reply #27 on: March 06, 2020, 08:47:46 AM »
That'll buff right out!   ;D   Actually, since it doesn't seem to be cracked, it could look pretty good after some work.

Edit: I see I missed the fact that it is cracked. Still not  too bad of a piece, though.
« Last Edit: March 06, 2020, 04:14:26 PM by OldSwartout »
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2268
Re: Right side carb and clutch cover
« Reply #28 on: March 06, 2020, 09:01:56 AM »
From the sellers description......

"Description

Has a crack"

Crack is circled by the seller in the attached pic.


[attachment deleted by admin]
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 951
Re: Right side carb and clutch cover
« Reply #29 on: March 06, 2020, 02:20:58 PM »
    I've seen far worse on Ebay, price is OK. Dents and crack would largely tap out with a bit of careful work.
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline Kenneth Pagel

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 273
  • What, me worry?
Re: Right side carb and clutch cover
« Reply #30 on: March 12, 2020, 12:39:42 PM »
Put me down for one.

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #31 on: April 15, 2020, 10:01:31 PM »
Well, we had planned on having the first of these covers in our hand by now.  I talked to the people at Clark Casting and they have not received the dies yet. They talked to the pattern maker a few weeks ago and he told them it would be a week.  No word from him since then.  I tried to call him over the past few days and get no response.  The people at Clark Casting don't understand what has happened as they have worked with him for years and have never had an issue.  I will let you know when we have more news.

  Sorry for the delay,
  DL

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 459
Re: Right side carb and clutch cover
« Reply #32 on: April 16, 2020, 08:41:11 AM »
If he is not an "essential business" in his state, he could very well be shut down by mandatory closures.
1966 175 DT and 1968 350 GTR

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1316
Re: Right side carb and clutch cover
« Reply #33 on: April 16, 2020, 05:07:52 PM »
The "Essential Business" issue probably is the reason. Besides, in my experience pattern makers tend to be older with long experience and if it is a small shop, that may consist of most of their workforce, so they may be self-quarantined.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: Right side carb and clutch cover
« Reply #34 on: April 17, 2020, 01:24:21 PM »
Keep the faith! We'll be back to our BSing before we know it! (Probably not May 1, but we'll get there!)
...bert

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #35 on: May 05, 2020, 04:35:22 PM »
Finally got in touch with the pattern maker and the foundry.  We are still on, but further down the road. As some had said it was due to Corona virus restrictions.

350 gtouk

  • Guest
  • Trade Count: (0)
Re: Right side carb and clutch cover
« Reply #36 on: May 24, 2020, 04:41:45 AM »
I've got a good spare one ( wrapped up in a box)
but i'd be interested in one   :)

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 146
Re: Right side carb and clutch cover
« Reply #37 on: June 19, 2020, 02:16:08 PM »
we have a first run of castings in hand. now the people who do my machine work are backed up so we have a ways to got yet.  Bt I think we just might get there.

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: Right side carb and clutch cover
« Reply #38 on: June 19, 2020, 03:23:11 PM »
Good news! Can you post a pic of the casting(s)? Thanks...bert

Offline Kenneth Pagel

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 273
  • What, me worry?
Re: Right side carb and clutch cover
« Reply #39 on: June 20, 2020, 11:33:34 AM »
Progress! It's a wonderful thing!

 


Gallery


Views:525
Comments (0)
By: hod928

Views:519
Comments (0)
By: hod928

Views:518
Comments (0)
By: hod928

Views:684
Comments (0)
By: hod928

Classifieds

Deleted

Price: $0.00
Date: 08/09/2024 07:09 am
Time Left:
Deleted

Price: $0.00
Date: 06/12/2024 07:57 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal