Author Topic: cylinder plating  (Read 593 times)

0 Members and 1 Guest are viewing this topic.

Offline anotheroldtrailrider

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 18
cylinder plating
« on: February 20, 2019, 09:15:30 PM »
As I start on the Mach II RS resto-mod, I have to wonder if anyone has comments/experience switching the cylinder plating to Nikasil as is used on my KTM's if the cylinders need anything.  I'd think piston ring material would still be compatible, and I've had great luck with it on various other projects.  I'm hoping the cylinders are straight but haven't seen inside the motor yet - the odo says 4200 miles and compression feels good on both cylinders ...

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1314
Re: cylinder plating
« Reply #1 on: February 21, 2019, 10:15:14 AM »
Most people use nikasil as a repair on these bikes.  It actually seems to be tougher than chrome in case of a seizure or other mishap.  Several of us have used it on race bikes.  There is some thought that it wears rings faster, but on these old bikes, no one is going to run them 20-30,000 miles to find out. With only 4200 miles on your bike, if the chrome hasn't started to peel from corrosion of the aluminum under it or some other storage related issue, it's just barely broken in and your cylinders and rings will be good as is. There are service wear limits in the service manuals downloadable from this site.

If you do need nikasil or rechroming, US Chrome and Millenium Technologies are the two most common vendors here in the US.
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

Offline anotheroldtrailrider

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 18
Re: cylinder plating
« Reply #2 on: February 21, 2019, 07:22:18 PM »
Thanks OldSwartout - that's great.  I'm hoping the chrome is in good shape, too, but it's nice to have modern options.  I'm also a big fan of ceramic coatings, and will probably do the combustion chambers and piston tops plus drylube on the skirts.  Any chance you have any info on exhaust and/or disc dimensions?  I've hydroformed a couple curved 4-stroke megaphones and would like to do some expansion chambers for this project.  Ultimate performance isn't the goal, but I think there's a little more in there without getting too carried away.  Any links to performance tuning info would be greatly appreciated...

 


Gallery


Views:5173
Comments (0)
By: Jon West

Views:6379
Comments (0)
By: rwgibbon

Views:6772
Comments (0)
By: Perry L Anderson

Views:6839
Comments (0)
By: Perry L Anderson

Classifieds

BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal