Author Topic: Pistons for Chibi engine  (Read 1283 times)

0 Members and 1 Guest are viewing this topic.

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 343
  • CL-100
Pistons for Chibi engine
« on: June 09, 2022, 02:32:29 PM »
I've been going through my Chibi parts for an upcoming project and find that I have both versions of the 60cc cylinder.  One is obviously the early version as it is cast iron and the other is the newer version (much lighter and different exhaust mount) which I assume is aluminum.  The bore on the newer version doesn't look to be chromed.  I've gone through the Chibi parts manual as well as the 50/60 parts book and both manuals list the same piston/rings for either cylinder.  I've always assumed that the pistons/rings for aluminum cylinders are different from the ones for the cast iron cylinders. 

Does anyone know for sure?

Thanks for any help.

Offline Chibi62

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 95
  • Retired USAF E-9 Combat Veteran / F-16, A-10, F-15
Re: Pistons for Chibi engine
« Reply #1 on: June 14, 2022, 04:16:47 PM »
Either piston will work for this application. The later and more common cylinder is cast aluminum with a steel (non-chrome) bore. Typically the upper compression ring is harden chrome, with carbon steel oil ring. If my memory serves me right - Pistons that have a recess dimple on the piston dome are used in chromed bore applications. There designed to handle heat better. Non-recessed dimple piston are standard carbon bore application.

Assuming the piston diameter is matched to the bore size (not bored over). You should be all set to run what you have.
Kevin   

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 343
  • CL-100
Re: Pistons for Chibi engine
« Reply #2 on: June 15, 2022, 01:04:20 PM »
Thanks for your response.  I've always thought that the pistons with the small dimple were for the non-chromed cylinder bores, while the 1/4" or so shallow swirl was for the chromed cylinders.  I appreciate you confirming that for me. 

I've got to find a standard size piston and rings for the new cylinder or a 2nd over piston for the iron cylinder. 

 


Gallery


Views:164
Comments (0)
By: hod928

Views:162
Comments (0)
By: hod928

Views:163
Comments (0)
By: hod928

Views:338
Comments (0)
By: hod928

Classifieds

175 DT for sale

Price: $800.00
Date: 06/12/2024 07:57 am
Time Left:
BS 175 DT Carburettors Mikuni VM 17 s

Price: 120.00 EUR
Date: 04/14/2024 09:55 am
Time Left:
BS175 DT 1966 Gas Tank

Price: 150.00 EUR
Date: 04/14/2024 09:37 am
Time Left:
Gto
Date: 03/02/2024 06:49 am
Time Left:

Recent Downloads added

Parts Manual BS-7 Std & Deluxe with new style part numbers
Rating: (None)
Filesize: 5483.15KB
Date: April 17, 2024, 10:15:22 AM
Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM

Powered by EzPortal