Author Topic: Alternate BS 350 Fuel Cock  (Read 429 times)

0 Members and 1 Guest are viewing this topic.

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 552
  • 1968 BS 350 GTR
Alternate BS 350 Fuel Cock
« on: August 25, 2019, 06:38:29 PM »
Has anyone  come up with a good alternative to the original 22 MM Bridgestone 350 fuel cock?

I'm restoring a BS 350 GTR as a rider and do not want to spend the money for a NOS Fuel Cock.

Restoring the original fuel cock is not an option.

I did a search on this site and did not find any. Scott's Bridgestone recommends a Kawasaki Z1 900.
I have not found a good quality alternative yet.

Recommendations are appreciated.

Thank you.

Randy

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 96
Re: Alternate BS 350 Fuel Cock
« Reply #1 on: August 26, 2019, 02:12:50 AM »
Hi Randy,

Richard has internal kits to restore taps.

If it's more than the internals corroded, what is wrong / missing from your existing one ?

ray

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 134
Re: Alternate BS 350 Fuel Cock
« Reply #2 on: August 26, 2019, 03:12:04 AM »
The stock petcock is easily rebuilt with the kit from Richard Clark. If the body is too far gone the petcock for the Z1 Kawasaki is a good replacement.

Online Mike Anderson

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 853
Re: Alternate BS 350 Fuel Cock
« Reply #3 on: August 26, 2019, 01:17:33 PM »
Hi Randy,

Why not get a kit from Richard, he probably has a good rebuildable petcock for next to nothing. You could clean it up and install the new kit. A lot easier than looking for a different replacement and cheaper than a new one. Just my thoughts.
Later Mike

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2218
Re: Alternate BS 350 Fuel Cock
« Reply #4 on: September 03, 2019, 03:29:52 PM »
Randy, this one might be your answer...... but you'll have to open up your wallet! As a plus, you wouldn't have to worry about gas flow!  :o

http://www.pingelonline.com/motorcycle-fuel-valves/dual-outlet-3311-d-ch.asp

This one is about $10 cheaper, if you don't mind the brass(?) nozzles....

http://www.pingelonline.com/motorcycle-fuel-valves/dual-outlet-3311-d-ah.asp

Or save even more on eBay.....

https://www.ebay.com/itm/Pingel-3311-D-CH-Power-Flo-Gas-Valve-Dual-Outlet-With-22mm-Nut-Harley-Davidson/173791268538?epid=171247247&hash=item2876c44eba:g:uSMAAOxy4dNSqOh5
« Last Edit: September 03, 2019, 03:58:21 PM by moonpup »
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 552
  • 1968 BS 350 GTR
Re: Alternate BS 350 Fuel Cock
« Reply #5 on: September 04, 2019, 10:12:42 AM »
Thank you Mike.

Randy

Offline Bridgestone Man

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 157
Re: Alternate BS 350 Fuel Cock
« Reply #6 on: September 04, 2019, 05:27:16 PM »
I am with Mike Anderson, I think its best to use a correct original fuel tap and one of Richard's rebuild kits, hey he may have a petcock too.  Sam Keys.


Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 923
Re: Alternate BS 350 Fuel Cock
« Reply #7 on: September 04, 2019, 05:33:29 PM »
          The 5/16 outlets on the Pingel valves may be a problem, could be difficult to stretch the necessary, relatively small diameter fuel tube over the spigots.

Randy, I do have a new, non BS fuel tap that I will probably never use. Will dig it out of my spares stash and pm you with photo, if it can be attached. Came off the GTO, sure we can sort out a trade.                             Brian.
« Last Edit: September 04, 2019, 06:33:36 PM by BRT-GTR »
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 923
Re: Alternate BS 350 Fuel Cock
« Reply #8 on: September 06, 2019, 05:10:15 AM »
          Finally found it. Tap does fit, can be configured to left or right lever operation and I will fit a second filter to the main supply. Let me know if you are interested or anyone else come to that.                                           Brian

 
« Last Edit: September 06, 2019, 05:21:08 AM by BRT-GTR »
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

 


Gallery


Views:237
Comments (0)
By: Usedknobby

Views:242
Comments (0)
By: Usedknobby

Views:306
Comments (0)
By: Perry L Anderson

Views:260
Comments (0)
By: Perry L Anderson

Classifieds

Bridgestone SR-175

Price: $3300.00
Date: 06/25/2021 04:29 pm
Time Left:
1970 200 mach2 ss.
Date: 06/20/2021 05:09 pm
Time Left:
1970 200 mach2 ss.
Date: 06/20/2021 05:07 pm
Time Left:
GTO
Date: 06/09/2021 03:41 pm
Time Left:

Recent Downloads added

BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM
2018 Article in Motorcycle Classics
Rating: (None)
Filesize: 3877.88KB
Date: June 29, 2020, 05:26:00 PM
350 GTR pdf version

Rating: *****
Filesize: 7366.26KB
Date: March 14, 2020, 09:41:23 AM

Powered by EzPortal