Bridgestone Motorcycle Parts Discussion Board
Bridgestone Tech Talk => 175 & 200 Talk => Topic started by: RayK on March 12, 2017, 04:59:19 PM
-
A question for the 175 (DT and SR) experts.
Can you use SR rings on a 175 DT piston?
Cheers
Ray
-
They'll work, but the end gap will be excessive, so performance may be down some. Others on here may have other opinions, so wait for more answers.
-
Thanks Karl, I have a choice of putting the old pistons and rings back in or new dt pistons with SR rings. Hobsons choice eh😯
-
Personally, I'd measure the end gap of each and go with the ones with the least.
-
Karl
I did as you suggested and found endgap on old pistons/rings to be 0.003 inch. SR endgap more than 0.003 inch. So cleaned them up and will go with old ones. Thanks for your help.
Ray
-
Ray
This may be a silly questions, why not put new 175 DT rings in as SR's are too small.
Sam Keys
-
Good question BS man,
I happened to have 2 pair of SR rings and no DT rings. As I live in Australia BS NOS parts are near impossible to find. Ergo I now have 2 pair of NOs SR spare. Luckily the used DT pistons and rings are OK to use.
Ray