Author Topic: How do you get the choke cable out!  (Read 3053 times)

0 Members and 1 Guest are viewing this topic.

00davemag

  • Guest
  • Trade Count: (0)
How do you get the choke cable out!
« on: February 22, 2010, 08:19:37 PM »
I need help getting the choke cable out of the carb on a MKII. It would be nice to clean them up off of the bike :D

Offline reed

  • Bridgestone Technical Advisor
  • Trade Count: (2)
  • *******
  • Posts: 2383
Re: How do you get the choke cable out!
« Reply #1 on: February 22, 2010, 08:34:15 PM »
OOdavemag
If you send me your carb i will put it in the ultrasonic tank and heat the water up its works very well.
Reed

Online OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1065
Re: How do you get the choke cable out!
« Reply #2 on: February 23, 2010, 09:52:34 AM »
After unscrewing the brass plunger cap and you find that the plunger is stuck in the carb, spray some penetrant down in there every day for a few days.  Usually the plunger will free up and you can pull it and the cable out.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline reed

  • Bridgestone Technical Advisor
  • Trade Count: (2)
  • *******
  • Posts: 2383
Re: How do you get the choke cable out!
« Reply #3 on: February 23, 2010, 04:22:42 PM »
oodavemag
If you find the plunger still stuck the service is free
Reed

Offline Mopar5426

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 317
Re: How do you get the choke cable out!
« Reply #4 on: February 24, 2010, 10:12:58 PM »
I Have Had The Sam Problem Getting The Choke Cable Out After Removing The Float Boal And Blowing It Clean I Toke A Map Gas Torch And Aplied A Little Heat At The Choke Area Along With PB Blaster An It Came Lose Good Luck

Online OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1065
Re: How do you get the choke cable out!
« Reply #5 on: February 25, 2010, 09:26:22 AM »
The bottom of the plunger has a rubber seal, so don't get it too hot.  Of course, if  a lot of heat is the only way, the plungers can be replaced, they're standard Mikuni parts.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

00davemag

  • Guest
  • Trade Count: (0)
Re: How do you get the choke cable out!
« Reply #6 on: February 26, 2010, 03:49:01 AM »
Thanks guys for the info. Surprisingly it runs fine with them stuck. I will try the penetrate oil method first. 

 


Gallery


Views:10
Comments (0)
By: harleywaynecycles

Views:15
Comments (0)
By: harleywaynecycles

Views:10
Comments (0)
By: harleywaynecycles

Views:5
Comments (0)
By: harleywaynecycles

Classifieds

Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 86d 17h 9m
Bridgestone 350 Carburetors (2nd. Set)

Price: $0.00
Date: 10/04/2018 04:52 pm
Time Left: 74d 22h 53m
1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 56d 13h 14m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 48d 19h 25m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal