Author Topic: 350 Running rich ? - Check your choke plungers.  (Read 622 times)

0 Members and 1 Guest are viewing this topic.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 708
350 Running rich ? - Check your choke plungers.
« on: September 22, 2017, 12:01:51 PM »
             My GTO was coughing, spluttering and snatching on light load, was almost unrideable. Despite having correct float levels, 25 pilots, 130 mains and needle clips second from top she still seemed to be running rich.  I was sure the choke plungers were seating but they were the only source of overfueling left.
           Pulled them out, prised out the tip rubbers (rock hard but NOS carbs) with a sharp point and needlenose pliers. Original rubber disc diameter was probably 7mm but only had a quarter inch punch. So stamped a couple of 2mm thick viton rubber (Ebay) discs. Put these in at an angle and used a small blunt screwdiver to press the sides in and down into the recess, working round the tip.  Refitted to carbs and made sure there was a bit of slack in the choke cable at the lever end.
         What a difference, she now runs smoothly at low revs and is pleasant to ride. So that's another issue cured, still vibrating at higher revs but will sort that in due course.

           Brian.
« Last Edit: September 23, 2017, 06:21:58 AM by BRT-GTR »
Unspoiled by progress.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2024
Re: 350 Running rich ? - Check your choke plungers.
« Reply #1 on: September 22, 2017, 01:29:27 PM »
Great tip Brian, thanks for taking the time to post it!  8)
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 268
  • CL-100
Re: 350 Running rich ? - Check your choke plungers.
« Reply #2 on: September 22, 2017, 04:04:19 PM »
Brian,

I've followed the thread on this subject on Yahoo Bridgestone and thought it was so useful that I printed it out and filed it with other jewels of information like this.  I'm in the process of gathering parts for a BS50 restoration as well as a 350 resto-mod I'm going to do in cafe racer style.  I do have a NOS set of carbs for the 350 project but I'm probably going to check the plungers on them.

I can't tell you how many times I've heard of carb problems with 350's that were only fixed by changing to different carbs.  There could be a whole lot of used carbs still in use with this fix!

Thanks for passing the good info on.

Rowland

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 396
  • 1968 BS 350 GTR
Re: 350 Running rich ? - Check your choke plungers.
« Reply #3 on: September 22, 2017, 06:24:54 PM »
Good to know.

Thank you.

Randy

 


Gallery


Views:18
Comments (1)
By: killerterp

Views:29
Comments (0)
By: rwgibbon

Views:55
Comments (1)
By: fahrkle

Views:83
Comments (1)
By: Geoff S

Classifieds

BS Parts Cabinet & Mics Parts

Price: $0.00
Date: 06/21/2018 07:19 pm
Time Left: 86d 5h 50m
350 GTR/GTO Carbs (Set #2)

Price: $0.00
Date: 06/21/2018 01:29 pm
Time Left: 86d 0h 0m
350 GTR/GTO Wiring Package

Price: $0.00
Date: 06/19/2018 01:33 pm
Time Left: 84d 0h 5m
Wanted BS 100 Sport Fuel Tank and Muffler
Date: 06/14/2018 03:46 pm
Time Left: 79d 2h 17m

Recent Downloads added

Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM
Bridgestone Magazine Article

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:38:08 PM
How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bert Lilley's BS 350 Racer Modifications
Rating: (None)
Filesize: 0KB
Date: January 09, 2017, 04:27:24 PM

Powered by EzPortal