Author Topic: 350 Crank Pin Size?  (Read 1497 times)

0 Members and 1 Guest are viewing this topic.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2078
350 Crank Pin Size?
« on: March 21, 2017, 07:27:33 PM »
Would anyone happen to have measurements for the 350 crank pins?  Length & diameter?
Confucius say... "Better to have Bridgestone than Kidneystone"

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2078
Re: 350 Crank Pin Size?
« Reply #1 on: March 22, 2017, 05:29:59 PM »
Update: I been informed that they are 24mm x 52.6mm.  8)
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline bert Lilley

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 24
Re: 350 Crank Pin Size?
« Reply #2 on: March 23, 2017, 10:54:45 AM »

  Just Happen to have one on my Desk  :- Pin Diameter = 0.945" in Dia x 25.4 = 24mm dia. 
                                                       
                                                                  Pin Length = 2.072" x 25.4 = 52.6mm Long.

Hope this Helps  Bert

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2078
Re: 350 Crank Pin Size?
« Reply #3 on: March 23, 2017, 07:55:13 PM »
Thank you for the confirmation Bert..... and yes, it does help.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 109
Re: 350 Crank Pin Size?
« Reply #4 on: March 25, 2017, 09:24:09 AM »
What information is available regarding the heat treat on these pins? 

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1064
Re: 350 Crank Pin Size?
« Reply #5 on: March 25, 2017, 12:20:42 PM »
Crank pins are typical bearing journal specs, RC60-62 hardness. They can be relatively soft core, RC30-45 with either a nitrided case that will be .007-.015 deep or carburized which should provide from .020-.050 case depth. With the nitride heat treat, there's not much depth for finish grind after plus the thin case needs a harder core for support.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Online bsracer

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 309
Re: 350 Crank Pin Size?
« Reply #6 on: March 26, 2017, 03:05:50 AM »
I just cut down some 175 pins to use for the crank jig and they were not soft in the center! Amazing how tough those things can be!

paul

 


Gallery


Views:10
Comments (0)
By: harleywaynecycles

Views:15
Comments (0)
By: harleywaynecycles

Views:10
Comments (0)
By: harleywaynecycles

Views:5
Comments (0)
By: harleywaynecycles

Classifieds

Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 86d 23h 50m
Bridgestone 350 Carburetors (2nd. Set)

Price: $0.00
Date: 10/04/2018 04:52 pm
Time Left: 75d 5h 34m
1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 56d 19h 55m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 49d 2h 6m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal