Author Topic: Pinion Gear  (Read 868 times)

0 Members and 1 Guest are viewing this topic.

Offline meevster

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 4
Pinion Gear
« on: February 15, 2017, 01:09:57 PM »
Ok, so this pinion gear is holding me back from completely taking the engine apart. I don't know if I am missing something, if it is just suck or if theres a special way of taking it off. I'd rather double check to make sure I'm not missing anything before I go prying at it, possibly breaking something that I didn't know about. I would like to be able to take off the rotary valve that's behind it so I can separate the crankcase.

So, any special way of taking it off or should I just start try to pry it out? I have taken the LEFT HANDED THREAD NUT off. In step 18, page 17 of the manual, it simply states to remove the retaining nut and gear from the shaft, nothing more than that so I'm assuming its just as easy as sliding it off. Again, this is a precaution on my part to just be sure I am doing it correctly. I have posted some pictures so you guys can see what I am working with. 

Offline skiri251

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 45
Re: Pinion Gear
« Reply #1 on: February 15, 2017, 01:24:38 PM »
No special way.
I used a three jaw gear puller but anything should do as long as you don't damage the rorary disk.


Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 420
Re: Pinion Gear
« Reply #2 on: February 15, 2017, 04:10:31 PM »
make sure you take that thin washer off - it can hinder removing the gear.

Dan
1966 175 DT and 1968 350 GTR

 


Gallery


Views:26
Comments (1)
By: killerterp

Views:32
Comments (0)
By: rwgibbon

Views:60
Comments (1)
By: fahrkle

Views:87
Comments (1)
By: Geoff S

Classifieds

1968 Restored BRIDGESTONE 175 Dual Twin

Price: $2900.00
Date: 07/11/2018 10:42 am
Time Left: 85d 2h 20m
UK registered Bridgestone 350GTR Original untouched bike

Price: £5900.00
Date: 07/07/2018 03:53 pm
Time Left: 81d 7h 30m
Bridgestone MK2 200ss
Price: £500.00
Date: 07/03/2018 02:29 pm
Time Left: 77d 6h 7m
BS Parts Cabinet & Mics Parts

Price: $0.00
Date: 06/21/2018 07:19 pm
Time Left: 65d 10h 57m

Recent Downloads added

Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM
Bridgestone Magazine Article

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:38:08 PM
How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bert Lilley's BS 350 Racer Modifications
Rating: (None)
Filesize: 0KB
Date: January 09, 2017, 04:27:24 PM

Powered by EzPortal