Author Topic: 1966 90 Trail dis-assembly--PLEASE HELP  (Read 1848 times)

0 Members and 1 Guest are viewing this topic.

Offline Royal Rick

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 50
1966 90 Trail dis-assembly--PLEASE HELP
« on: September 12, 2015, 01:10:21 PM »
I have stripped the frame of everything except the oil tank and main stand. How the heck does the oil tank attach? It is stuck fast. And, I can't get the stand tube out of the main stand. I took off the cotter pin and bolt. It looks like it should just slide through but it's won't move.

Thanks for any input!

Offline mqtsteve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 270
  • (2) BS90 Sport , BS90 Trail, BS90 Mountain
Re: 1966 90 Trail dis-assembly--PLEASE HELP
« Reply #1 on: September 12, 2015, 04:17:05 PM »
Hey rick,  The oil tank is attached to the frame with stud and nut. The stud is on the back of the oil tank. There's a hole that the ignition wires (key switch) go through on the other side of the oil tank (left side of frame). The hole is big enough to fit a socket through to loosen the nut. Oil tank should fall away from the frame. Here's a photo of the ignition wire hole. Hope this helps, Steve (not sure I understand the stand problem?)
Steve S.
4/1966 BS90 Sport(o.i.), 5/1966 BS90 Sport(o.i.),
1965 BS90 Trail, 1965 BS90 Mountain

Offline Royal Rick

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 50
Re: 1966 90 Trail dis-assembly--PLEASE HELP
« Reply #2 on: September 12, 2015, 07:13:41 PM »
Thanks so much, Steve. I would not have thought of that! That part of my frame is full of what looks like insulation, but I suspect is an old mouse nest. I pulled it out and can see the nut.

I think the problem with the stand is that the previous owner pounded on the stand bolt with a hammer and created small lips on both ends of the stand tube--that's what is making it stick. Gonna grind the ends some and see if that works.

Really appreciate your help!

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 427
Re: 1966 90 Trail dis-assembly--PLEASE HELP
« Reply #3 on: September 12, 2015, 07:36:21 PM »
Steve, is that your bike in the picture? It looks like someone hacked out a bit where the battery goes.
1966 175 DT and 1968 350 GTR

Offline mqtsteve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 270
  • (2) BS90 Sport , BS90 Trail, BS90 Mountain
Re: 1966 90 Trail dis-assembly--PLEASE HELP
« Reply #4 on: September 13, 2015, 09:21:40 AM »
Dan, Yes it's one of my bikes.  Here's a better photo of the battery area.  It looks identical to my other 90 sport.  Just a bit of rust from a leaky battery.  Sorry about hijacking your thread, Steve
Steve S.
4/1966 BS90 Sport(o.i.), 5/1966 BS90 Sport(o.i.),
1965 BS90 Trail, 1965 BS90 Mountain

 


Gallery


Views:7
Comments (0)
By: harleywaynecycles

Views:6
Comments (0)
By: harleywaynecycles

Views:6
Comments (0)
By: harleywaynecycles

Views:5
Comments (0)
By: harleywaynecycles

Classifieds

1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 82d 5h 14m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 74d 11h 25m
SOLD

Price: $0.00
Date: 09/04/2018 09:18 pm
Time Left: 70d 19h 19m
bridgestone tires
Date: 08/29/2018 05:24 pm
Time Left: 64d 15h 24m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal