Author Topic: Anyone know how to get the BS 90 speedometer gear out?  (Read 1075 times)

0 Members and 1 Guest are viewing this topic.

Offline luvmykids2

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
Anyone know how to get the BS 90 speedometer gear out?
« on: March 29, 2015, 10:00:47 PM »
My speedo gear is down to no gears. I am going to try and get one from this site but can't quite figure out how it comes out. Might be by the brass fitting that has the set screw on it. So then the question is does it screw out or pull out?  Thanks for any help!

Offline disc_valve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 410
Re: Anyone know how to get the BS 90 speedometer gear out?
« Reply #1 on: March 30, 2015, 06:22:29 AM »
Hi,  luvmykids2

You're right, you need to remove the brass cable fitting after removing the set screw. The brass fitting does just pull out, but after 40 years it may be a bit reluctant to move. Try attaching the end of an old cable to give something to grip on in a vice and PULL!! Alternatively, you may be able to get a wedge or a soft drift inside between the speedo pinion and the other side of the fitting to start things moving.

Good luck,




Comments (0)
By: Geoff S

Comments (0)
By: AlanJohn

Comments (3)
By: mybridgestones

Comments (2)
By: OldSwartout


1968 350GTR

Price: $4500.00
Date: 03/10/2018 09:39 am
Time Left: 81d 15h 12m
ISO / WTB: RH 350 head
Date: 02/13/2018 04:22 am
Time Left: 56d 9h 55m
Rear Carrier

Price: $0.00
Date: 01/23/2018 04:33 pm
Time Left: 5d 22h 6m
Solo seat

Price: $0.00
Date: 01/23/2018 04:29 pm
Time Left: 5d 22h 2m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal