Author Topic: badges  (Read 1430 times)

0 Members and 1 Guest are viewing this topic.

Offline Gizo

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
« on: January 19, 2015, 10:22:29 PM »
I am repainting my 175 DT I would like to remove the badges on the side cover and tank before painting, 
how do I remove them?  can they be reattached later or will they then need to be screwed or bolted?

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1007
Re: badges
« Reply #1 on: January 20, 2015, 09:29:46 AM »
The tank badges are attached with small screws, so are easily removable (unless rusted, of course).  The side cover emblems are attached with hollow brass rivets. Just grind off the backside and remove.  There is a whole thread about the side cover emblem rivets and replacement:
Karl Swartout
Mooresville, IN
BS175 Roadracer

Offline jjwithers

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 93
    • Beemers and Bits
Re: badges
« Reply #2 on: November 11, 2016, 05:10:08 PM »
Does anybody know the size/thread of the tank emblem screws?  I ordered some as per the part number and they are not correct (too big). 
I'm sure I can get them online or elsewhere if I know the size.  they are too small for my SAE and Metric thread checkers. 

Also, what can I use to put the VIN ID plate onto the frame (Under your butt on the right side)?  I can't find a rivet small enough and the pins that were originally there are not usable. 

These are for a 175HS.

1967 175 HS
and some BMW's from the 60's and 70's

Offline mqtsteve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 259
  • (2) BS90 Sport , BS90 Trail, BS90 Mountain
Re: badges
« Reply #3 on: November 12, 2016, 06:05:56 AM »
Hey josh,
The badge screws are M3x6 in the parts catalog.  There is another post covering thread pitch.  It says the pitch is .6mm not the standard.  Here's a link.
Hope this helps.  Good luck, Steve
Steve S.
4/1966 BS90 Sport(o.i.), 5/1966 BS90 Sport(o.i.),
1965 BS90 Trail, 1965 BS90 Mountain



Comments (0)
By: Geoff S

Comments (0)
By: AlanJohn

Comments (3)
By: mybridgestones

Comments (2)
By: OldSwartout


Used License Backer Plate

Price: $0.00
Date: 03/22/2018 01:09 pm
Time Left: 89d 11h 40m
GTO Handlebars???

Price: $0.00
Date: 03/19/2018 12:35 pm
Time Left: 86d 11h 6m
1968 350GTR

Price: $4500.00
Date: 03/10/2018 09:39 am
Time Left: 77d 9h 10m
ISO / WTB: RH 350 head
Date: 02/13/2018 04:22 am
Time Left: 52d 3h 53m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal