Author Topic: Engine rebuild  (Read 1357 times)

0 Members and 1 Guest are viewing this topic.

Offline Gizo

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Engine rebuild
« on: January 14, 2015, 09:53:47 PM »
I have pulled the engine apart on my 175dt, as the was oil getting from the gear box into the crank case.
While it is apart  Is there anything I should do?
I was thinking of changing the needle bearings in the Pistons and crank as well as the bearings in the crank.
I am doing piston rings. And will replace all gaskets.

Any tips on how to disassemble the crank to change the bearings?
I did have a grinding noise at idle that disappeared as soon as you increased revs,  told it was possibly the timing gear? So I will change that as well.
Is there anything else I should do while it is apart?


Offline disc_valve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 410
Re: Engine rebuild
« Reply #1 on: January 15, 2015, 06:15:40 AM »
Hi,

The grinding noise sounds exactly like a worn fibre idler in the drive to the generator. If you have a selection of gears, fit the one that gives the least amount of backlash between crank and generator. If you can track down a new gear, even better.

Stripping the crank to replace big ends and centre ain bearing needs a press to split and some care in reassembling an aligning. Not a job I've ever tackled but it is standard practice ion rebuilding two-stroke cranks, so there should be no shortage of specialists
pout there to help. Try asking around at your local bike dealers.

Graham Weeks

 


Gallery


Views:15
Comments (1)
By: killerterp

Views:28
Comments (0)
By: rwgibbon

Views:53
Comments (1)
By: fahrkle

Views:82
Comments (1)
By: Geoff S

Classifieds

BS Parts Cabinet & Mics Parts

Price: $0.00
Date: 06/21/2018 07:19 pm
Time Left: 89d 17h 51m
350 GTR/GTO Carbs (Set #2)

Price: $0.00
Date: 06/21/2018 01:29 pm
Time Left: 89d 12h 0m
350 GTR/GTO Wiring Package

Price: $0.00
Date: 06/19/2018 01:33 pm
Time Left: 87d 12h 5m
Wanted BS 100 Sport Fuel Tank and Muffler
Date: 06/14/2018 03:46 pm
Time Left: 82d 14h 17m

Recent Downloads added

Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM
Bridgestone Magazine Article

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:38:08 PM
How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bert Lilley's BS 350 Racer Modifications
Rating: (None)
Filesize: 0KB
Date: January 09, 2017, 04:27:24 PM

Powered by EzPortal