Author Topic: Any tips on polishing aluminum?  (Read 4452 times)

0 Members and 1 Guest are viewing this topic.

Offline duckman86

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 77
Any tips on polishing aluminum?
« on: September 16, 2013, 07:48:49 PM »
Hello, I was wondering what other people did to polish there aluminum parts. I'm using a cloth wheel and soft metal compound and it just doesn't want to take the compound off the piece, it like sticks to it and won't buff it out. I was wondering if the compound is supposed to be really hard or more putty like? The stuff I just bought is like rock solid.
If it doesn't throw you off, it doesn't have enough power.

Offline bsforever

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 162
Re: Any tips on polishing aluminum?
« Reply #1 on: September 16, 2013, 08:29:26 PM »
I used 'Mothers' Mag & Aluminum Polish with the cloth buffing wheel.... did a pretty good job for me. :)

Offline IrishWheelee

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 19
Re: Any tips on polishing aluminum?
« Reply #2 on: December 27, 2014, 09:30:27 AM »
I have used compound blue first and white last and if your buffing pad is dirty you will get a black residue on it. You can remove it with Autosol on a cloth and then repolish with a clean cloth. To remove the dirt from your buffer you can use a saw blade and them start the process again. the allow will look better than new it will look like chrome.

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1104
Re: Any tips on polishing aluminum?
« Reply #3 on: December 30, 2014, 02:06:32 PM »
i use a fine wet and dry paper and then autosol or liquid reflection smeared over the part on a buffing wheel .starting at the farthest point and working back so it always has a bit of polish and doesn't run dry this  will stop the black most of the time . I have just got a dentist sand blaster very small and fine also a dentist polisher its 1/4 horse very quiet and powerful enough that I can force a metal rod into it and it does not stop spinning  and runs a lot slower than a bench grinder I am going to test it out soon will post some pics

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 430
Re: Any tips on polishing aluminum?
« Reply #4 on: December 30, 2014, 02:23:05 PM »
Coxy - what kind of dentist uses a sand blaster? Makes my teeth hurt just thinking about it.
1966 175 DT and 1968 350 GTR

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1104
Re: Any tips on polishing aluminum?
« Reply #5 on: December 30, 2014, 02:32:41 PM »
its a micro unit I think it must be used for dentures maybe .though it does say for stain removal .it does have grit I think it is soda or the likes

 


Gallery


Views:10
Comments (0)
By: harleywaynecycles

Views:16
Comments (0)
By: harleywaynecycles

Views:10
Comments (0)
By: harleywaynecycles

Views:5
Comments (0)
By: harleywaynecycles

Classifieds

Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 82d 16h 30m
Bridgestone 350 Carburetors (2nd. Set)

Price: $0.00
Date: 10/04/2018 04:52 pm
Time Left: 70d 22h 13m
1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 52d 12h 34m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 44d 18h 45m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal