Author Topic: Working a bug out!  (Read 144 times)

0 Members and 1 Guest are viewing this topic.

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 111
Working a bug out!
« on: July 17, 2017, 12:21:32 PM »
A few weeks back one of my GTRs sprung a gas leak. Seemed to be leaking right out of the petcock.  Turned out the fuel line had a split right where it slips onto the barb fitting.  So I just pulled it off and left it that way until I got around to changing it.  Went to ride it yesterday and soon after I started it I had a steady flow of gas out of the carb with the new line.  So I parked it and took another bike. 
   Took it apart this morning not really too sure what I would find because these had been my last set of nos carbs and they should not  have any wear.  Everything looked ok. The float was fine. The needle didn't seem to stick so I pulled the needle seat out and looked at it.  Here was a little reddish brown beetle (deceased) not quite 1/8 inch long in the needle seat. 
   The only thing I can figure is that he crawled down that gas line into the carb while the gas line was off.  Has anyone else had anything like that?

Offline Tom Meadows

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 24
Re: Working a bug out!
« Reply #1 on: July 17, 2017, 12:34:41 PM »
Earwigs are more common in my experience, and I've found paint flecks from the tank and lint in needle seats as well. How they actually got there only they know.. but get there they did!.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 566
Re: Working a bug out!
« Reply #2 on: July 18, 2017, 07:05:16 AM »
          These little blighters will get in anywhere  ;D.
     One of my GTRs (US import) came with two wasp or hornet nests in the headlamp shell, via a missing neutral lamp holder.

       Once had a problem with dirt repeatedly getting into the float bowl of a ford carb, including a grain of wheat !  How the hell did that get in there  :-\, only solved the problem when I traced the carb bowl vent line to find the end was pointing forwards in a wheel arch cavity. Simply turned it to face backwards, sorted, no more dirt. :D
Growing old is compulsory, Growing up is optional.

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1341
Re: Working a bug out!
« Reply #3 on: July 18, 2017, 11:14:21 AM »
In-line filters will block most intrusions.
...bert

 


Gallery


Views:33
Comments (0)
By: busagsx1300

Views:26
Comments (0)
By: busagsx1300

Views:58
Comments (0)
By: AlanJohn

Views:64
Comments (0)
By: AlanJohn

Classifieds

License Plate Frame

Date: 07/18/2017 06:13 pm
Time Left: 84d 18h 46m
175/200 Gas Tank

Price: $0.00
Date: 07/13/2017 03:28 pm
Time Left: 79d 16h 1m
Seat

Price: $0.00
Date: 07/13/2017 03:24 pm
Time Left: 79d 15h 57m
Rockford 2 Cycle Oil

Price: $0.00
Date: 06/14/2017 04:29 pm
Time Left: 50d 17h 3m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 29
Filesize: 7154.56KB
Date: April 18, 2017, 07:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 55
Filesize: 937.72KB
Date: July 08, 2015, 11:58:53 AM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 39
Filesize: 937.53KB
Date: June 29, 2015, 05:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 85
Filesize: 9429.41KB
Date: April 22, 2015, 03:18:43 PM
Comments (0)

Powered by EzPortal